Alexs BW S362sx-e Build

[AYOUSTIN]

Goodness, does that manifold cause the turbo to sit closer to the motor than most? Or is that just a giant turbo housing?

It's not really closer to the head but it does sit lower so it's closer to the block and in my case the tcase as well. The oil drain was a nightmare to figure out.

 

[UrDroolinImSpoolin]

Nice bro !! ya im doing a similar mani but top mount so we will see what fabrications i will have to do as far as valve cover goes lol
[doublepost=1491493689][/doublepost]Update my Exhaust mani and RamFab 4" intake came in but only have pictures of the intake from RamFab !! Came out great !!

 

[UrDroolinImSpoolin]

I have my BW S362sxe ready to go with manifold . Just ordered the entire fuel set up !!!!

JMF V2 single runner w/ PI will be powdercoated black
ID1000cc injectors
Split second controller
AEM 380lph fuel pump
Fuel Labs 75 micron and 6 micron filter
Fuel Labs FPR and gauge
Summit racing fuel cell (for 100%meth)
AEM wideband Failsafe gauge


Will update with pictures when thy arrive to the house . I'll be back in the states in about 2 months from deployment and everything will be there am done I will be busy putting everything in and going to the rollers!

Next to order is the ACT 6 puck Clutch and PTE 46mm EWG

Like to say thanks to Justin Brasil Brent Sipe and Bryce Williams for help with part numbers and information that I needed!!

 

[Bearded Jersey Devil]

You're my hero. Come back and visit ussss

 

[UrDroolinImSpoolin]

You're my hero. Come back and visit ussss

Maybe !!! Miss the Nator WA guys hope all is well man

 

[UrDroolinImSpoolin]

UPDATE!! All aux fuel set up mentioned above have arrived !! Well next I'm ordering CorkSport inj seals , sending my wire barness off to Eric to get the tuck and PI added for aux fuel. Going with a SpeedFactory Racing intercooler instead of the treadstone, more money but it will hold higher horsepower. Having IC piping fabricated and welded loacally for an under route set up . PTE 46MM EWG is on its way as well.


So what's left... let's see


When I get back from deployment I'll have to put very thing on and hook it all up , then go to the local race shop and have some fuel lines and fittings made for the fuel system. Then once it's all together I will have to trailer it over to Fab shop for then IC piping and exhaust to be fabricated ( still deciding to go fender or hood exit ). After that get her full of new fluids and get ready to hit the rollers to dial her in !!

 

[UrDroolinImSpoolin]

It's all pretty much here !! Just waiting on a few more things !!! Deployment is coming to an end and will be home really really soon !! Can't wait to un box and get to work !! Will keep you updated

 

[cshunter]

Can't wait to see this sucker around town. I really need to get my aux fuel set up done/on.

Btw, what are you going to do for grip?

PS. Don't know if you had been or not, but local 1/8th mile track is garbage.



Sent from my Pixel using Tapatalk

 

[Darthspeed3]

I literally got to the end and said Awwwwwwww.... can't wait to see this one come together.

 

[UrDroolinImSpoolin]

Here are some pictures of the new set up !!!! Sorry I've been quiet on here I've been so busy trying to get this done by a deadline and having vacation time to do it !! It runs and drives just waiting on my actual exhaust and wastegate dump to get fabricated then hood will go on and we will be rockin and rollin!

Follow my YOUTUBE channel for more updates

https://www.youtube.com/user/aplista1790

ADD my Instagram @1_bad_ms3

Sent from my iPhone using Tapatalk

 

[tmillner]

This thing is insane. Well done Sir

Sent from my SM-N930P using Tapatalk

 

[UrDroolinImSpoolin]

This thing is insane. Well done Sir

Sent from my SM-N930P using Tapatalk

Thanks man !!!!! Appreciate it


Sent from my iPhone using Tapatalk

 

[tmillner]

Dumb question, gold cans on each of the intercooler?

Sent from my SM-N930P using Tapatalk

 

[UrDroolinImSpoolin]

Pre and post fuel pump fuel lab fuel filters


Sent from my iPhone using Tapatalk

 

[tmillner]

Yeah, i guess i can scroll through next time and answer my own question. Either way good shit, keep updates coming.

Sent from my SM-N930P using Tapatalk

 

[MileHigh303]

Well hai alex


Sent from my iPhone using Tapatalk

 

[UrDroolinImSpoolin]

Well hai alex


Sent from my iPhone using Tapatalk

Joe?


Sent from my iPhone using Tapatalk

 

[UrDroolinImSpoolin]

New video!!




Sent from my iPhone using Tapatalk

 

[MileHigh303]

Joe?


Sent from my iPhone using Tapatalk

Damnit you're no fun sir !


Sent from my iPhone using Tapatalk

 

[UrDroolinImSpoolin]

Damnit you're no fun sir !


Sent from my iPhone using Tapatalk

Hahaha gotcha bisshhh lol


Sent from my iPhone using Tapatalk