Blinker question

[ToyCop]

Anyone know if the front and rear blinkers are linked? Previous owner replaced front and rear flashers with LEDs. I removed the rear LEDs and resistors and put in OEM bulbs. Now, I am getting hyper flash with the turn signal switch. Hazards are flashing normally, but I guess that’s because the switch is different. I plan on removing the front LEDs at some point, but figured it could wait a bit.

 

[Mauro_Penguin]

Yes.

They are linked on a circuit so you can tell if one of the bulbs is out.

Make sure you are getting current to the rear and that the guy didnt short out a wire somewhere with China lights.

 

[ToyCop]

Yes.

They are linked on a circuit so you can tell if one of the bulbs is out.

Make sure you are getting current to the rear and that the guy didnt short out a wire somewhere with China lights.

Thanks. They all work, they just flash fast. Guess I’ll take the front apart and get those out too. Figured I’d get all the little stuff done while my bumper cover is in for paint.