HMDMS3
Greenie N00B Member
Hey everyone, new member here looking for a tad bit of help. Been having a problem recently of my car just dying after like 30 yards of driving. After much reading online I went ahead and replaced the fuel resistor along with all of my fuel relays, fuses and circuit relay. Still same problem so I ordered a multimeter and started testing the terminals.
So I’ve discovered that I’m only getting a reading of 0.4v and not the 12v from my circuit relay terminal and resister connector. Attached is a picture of the locations.
Does anyone know what can be causing this low reading? I’ve learned that the terminal gets it signal from the fuel resister. When I unplug it I get a 0 reading at the terminal sight.
So I guess my question is where does the resistor power signal come from that’s giving me the .4v reading?
thanks in advance!
So I’ve discovered that I’m only getting a reading of 0.4v and not the 12v from my circuit relay terminal and resister connector. Attached is a picture of the locations.
Does anyone know what can be causing this low reading? I’ve learned that the terminal gets it signal from the fuel resister. When I unplug it I get a 0 reading at the terminal sight.
So I guess my question is where does the resistor power signal come from that’s giving me the .4v reading?
thanks in advance!
Attachments
Last edited:
