Crank but No Start (No spark)

Olen

Greenie N00B Member
Hey everyone.
2011 2.3 Turbo with 107k miles.
Did a timing chain replacement (boy what a process). Had never seen that before and it was an ordeal. Had to watch 20 hours of youtube to make sure I was doing it right. Anyway, all done and back together. I verified timing after also.
Problems is it cranks but no start.
Checked high pressure fuel line by pulling yellow clipped line partially off and fuel started spraying out so I know it's getting fuel.
Pulled a plug and had my son crank it over while I held the plug up against part of the motor with the boot. No spark. Did that to 3 of the 4 and same thing with all of them. Didn't see a reason to do the 4th. Also, could smell the gas from engine being turned over but one of the plugs not being in there. Another reason I'm thinking it's not a gas problem.

Question: any suggestions on fuses or something for figuring out why I'm not getting a spark?
 
Check all of the electrical connectors that you have touched. Check the ground by the hofp
 
Back
Top