GenPu 2nd Gen Mazdaspeed bumper fitment fix for the headlight!

****Final Bracket Design has 1 slot near the headlight area for use. Use the back fenderwell area bolt location to install the fenderwell latch pin**** email raiderfabusa@gmail.com with any questions!****

Brackets are now available any time on the MSO Store! https://mazdaspeeds.org/index.php?pages/store/


Here is the how to which will get everyone set up. Thank you so much, @CMajor and @Sho. https://mazdaspeeds.org/index.php?threads/raiderfab-gen-pu-installation-guide.4661/

Ok, making a separate thread. Will elaborate more, but looking at making a bracket that was cad designed by our @Maisonvi for @Redline.
http://mazdaspeeds.org/index.php?threads/dang-bumper-tabs-again-permanent-solution-time.1290/page-5

This is a setup that fixes the current option being sold that is flimsy and does not really work at all.


****IF YOU BOUGHT THE RAIDERFAB FENDERWELL FIX, THIS WILL WORK FOR YOU AS WELL! OUR KIT WILL USE THE LOWER BUMPER BRACKET BOLT LOCATION TO HOLD THE BRACKET AND LATCH!****

Sign up if you would order this:

1) Redline PAID
2) nekret PAID
3) superman PAID
4) RaiderFab CLAIMED!
5) vtmongoose PAID
6) INTERNET PAID
7) monkey.bones.007 PAID
8) RaiderFab CLAIMED
9) RaiderFab CLAIMED
10) Jdutch PAID
11) GCPhotographers PAID
12) Darthxar PAID
13) mastermind PAID
14) monkey.bones.007 PAID (set #2)
15) Lazuras29 PAID

Here are pics!
****Final Bracket Design has 1 slot near the headlight area for use. Use the back fenderwell area bolt location to install the fenderwell latch pin**** email raiderfabusa@gmail.com with any questions!****

 

the week needs to hurry up and fly by

 

5 more days! Hoping for at least 3 more people to sign up. I want to order more than 2 extras. The ones I get to sell and fun MSO, I plan to sell for $120 for the set.

 

5 more days! Hoping for at least 3 more people to sign up. I want to order more than 2 extras. The ones I get to sell and fun MSO, I plan to sell for $120 for the set.

If you don't get 3 people let me know and I'll buy another set for Nator CO. I may just do that anyway because as everyone knows I'm a hoarder.

crapatalk, yes it sucks for free.

 

Sorry for the delay. Monies sent yo!

 

Ok, I'm sick and tired of this damn thread popping up on the new posts page.

I may need this because I got the Treadstone FMIC blues.

@Raider I still have that old ass Latch kit from the original MSF group buy in a box. I got the optional springs too. What do I need for this bracket add on, and how much will it cost?

 

Ok, I'm sick and tired of this damn thread popping up on the new posts page.

I may need this because I got the Treadstone FMIC blues.

@Raider I still have that old ass Latch kit from the original MSF group buy in a box. I got the optional springs too. What do I need for this bracket add on, and how much will it cost?

You need the bracket and the latches and pins for up top. For down below on GenPu you need shorter pins. I've got those posted already too.


Sent from my iPhone using Tapatalk

 

Got you added @Mastermind46!

Closing in 5 days, spread the word around, not a lot of extras and I don't know when I will have 10 on board for another round!

 

@Raider sign me up for another set. I'll get you monies right meow. I know someone in Nator CO will need this.

crapatalk, yes it sucks for free.

 

Done and done on a second set.

crapatalk, yes it sucks for free.

 

Done and done on a second set.

crapatalk, yes it sucks for free.

You are added, as is @Mastermind46.

I am keeping this up until the 20th!

 

If you have NOT received a PM from me on how to order latches, please let me know!

 

Hey Raider. We spoke through Gmail. I paid for the brackets!

I'm so excited and looking forward to finally fixing the bumper!

 

FINAL DAY! just got 1 more signed up from the old forum too. Thanks to whoever referred him to me.

@PapaBruno you still in the group buy?

 

Sweet! REALLY looking forward to receiving these
Thanks again to @Raider for allowing this project, and to @Maisonvi for helping me get this all sorted. The onus of gratitude is owed to him and his extensive skill.

 

FINAL DAY! just got 1 more signed up from the old forum too. Thanks to whoever referred him to me.

@PapaBruno you still in the group buy?

He always busy or he can be like me who used to get notifications of post and it's gone. I must be doing something wrong

 

Well I'll be processing Sunday, there is a little extra.


Sent from my iPhone using Tapatalk

 

Well I'll be processing Sunday, there is a little extra.


Sent from my iPhone using Tapatalk

Looking forward to it. I hope it come with instructions..lol

 

Looking forward to it. I hope it come with instructions..lol

@Redline has a basic how to on his thread but he will update once he gets the brackets.


Sent from my iPhone using Tapatalk

 

I just hope wherever I stash this, I can actually find it when my bumper starts to sag.

Sent from my XT1575 using Tapatalk

 

Submitted the specs and CAD for fabrication. I have stepped in to make sure I got 3 total extras from this. The shop will contact me tomorrow. I will pay them once invoiced and then the ball gets rolling on these. Thanks to all who signed up. If I have NOT sent the link to order the latches to you, please PM or email me ASAP.

I will be offering the 3 pieces for $110 shipped. 100% will go into funding the MSO Raffle.