HFS4 Install Info

Porterhouse07

Porterhouse07

Greenie N00B Member
I have an Aquamist HFS4 kit coming to me this week and have read through their install guide. Does anyone have the wiring diagram that shows which wires I tap into on a genpu? Their instructions are universal so only shows what they connect to, not colors or locations.

Also, in the DI integration section, what do I select for each option? I'm guessing 3.5 for the MAP sensor type (I have a 3 bar). The preamp gain says the default is for some DI systems but that x2.5 is for 95% of current DI systems.

I am also a little confused when it comes to the flow sensor config. Do I leave it alone and solder nothing for running 1 jet?

Thanks in advance for input.
 
Awesome choice on the kit, are you using the system as IDC based or boost? If IDC you don't need to mess with the MAP sensor settings, but I could be wrong because I have the HFS-3 system and the 4 is slightly different.

Here's the link for the wiring diagram http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2197 , feel free to join the forum, Richard (on the aquamist forum) knows the systems like the back of his had
 
Last edited:
DISIFTW said:
Awesome choice on the kit, are you using the system as IDC based or boost? If IDC you don't need to mess with the MAP sensor settings, but I could be wrong because I have the HFS-3 system and the 4 is slightly different.
Click to expand...

Not sure yet to be honest. Still need to talk to my tuner. I was just reading through the install guides and wanted to be fully prepared. Thanks for your help
 
You must log in or register to reply here.
Back
Top