HPFP pressure drop at WOT (with Autotech)

KCi

KCi

Greenie N00B Member
The HPFP pressure holding fine at WOT till 5000rpm and it started dropping flat to 900psi. At the same spot, the AFR run lean. The idle HPFP pressure holding fine at 450psi-ish. No sign of relief valve failure.

I highly suspecting Autotech failures after 50k miles. The WOT log as attached. Appreciate inputs before I spend cash on new internal.
 

Attachments

jsmith said:
You've done the key on warm engine off test? Fuel pressure went up to 1600ish?
Click to expand...

Yes sir, done KOEO procedure and pressure able to hit 1600psi after about 5 mins.


Sent from my iPhone using Tapatalk
 
Clean the pump, look for scoring inside the collar and on the piston. Also check spill valve for sticky.
 
  • Like
Reactions: KCi
Thank you @Enki for chipping in. Let me get it done and report back. Appreciated the time to review the log.
 
I'm waiting for the new autotech internal to arrive. It will takes some time as I stay outside USA. I will do the recommended cleaning and do the log using existing internal. If not working, will take out the hpfp again and put in the new internal. All will be done in single day.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top