[SOLVED] Injectors 1 and 2 not firing

[chris vissariou]

When I had issues with mine Noid test was fine, however it was pin in the injector that was angled away from the female pin and not making contact with the harness connector. Bent it vertical and it was fine. This was after an injector cleaning

They are new Injectors so I doubt it's the pins on the injector. My Noid test is failing for Injector 1&2 anyway, so it's somewhere in the loom or ecu

 

[Awafrican]

They are new Injectors so I doubt it's the pins on the injector. My Noid test is failing for Injector 1&2 anyway, so it's somewhere in the loom or ecu

I thought the same, all I'm saying is don't discount something simple from personal experience.
Alright so here's the pins on the ecu to the injectors, also check the big square ish one that the injector harness plugs into by the intake manifold

 

[chris vissariou]

When I had issues with mine Noid test was fine, however it was pin in the injector that was angled away from the female pin and not making contact with the harness connector. Bent it vertical and it was fine. This was after an injector cleaning

Yeah see my Noid test is flashing once for injectors 1&2, and they are new Injectors also so the problem isn't with them

 

[godspeed03]

Yeah see my Noid test is flashing once for injectors 1&2, and they are new Injectors also so the problem isn't with them

Having the same problem over here, did you come to any conclusions?