ROBERTO L ARANO
Greenie N00B Member
I'm contemplating using an MZR engine in a racecar.
1) Do you now if JDM mzr ecu's will be require an immobilizer (gauge cluster etc).
2) If so can USA dealers pair them to USDM gauge clusters /keys etc?
Pending answer to above, next will be Can bus questions.
I'm not a mazda guy yet! so not sure where the best technical forum for MZR engines is on the interwebs.
Thanks in advance.
P.S please stick to specific questions (I'm a very experienced ,53 years old-ouch!, fabber/mechanical engineer.good with microcontrollers etc, have done weird engine swaps in the past etc)
1) Do you now if JDM mzr ecu's will be require an immobilizer (gauge cluster etc).
2) If so can USA dealers pair them to USDM gauge clusters /keys etc?
Pending answer to above, next will be Can bus questions.
I'm not a mazda guy yet! so not sure where the best technical forum for MZR engines is on the interwebs.
Thanks in advance.
P.S please stick to specific questions (I'm a very experienced ,53 years old-ouch!, fabber/mechanical engineer.good with microcontrollers etc, have done weird engine swaps in the past etc)