Mazdaspeed 6 bulb guide & discussion

[Speedie6]

Vehicles that require HID CANbus or LED decoders

That link seems to be bad. But I Googled for "Vehicles that require HID CANbus or LED decoders" and got this page:

Vehicles that require HID CANBUS or LED Decoders – BRI Source

On that page, no Mazda is listed, not even 2020+ models.

The ms6 is not new/advanced enough to throw a bulb out error haha.

Only lighting issue I've ever seen with the ms6 is if you do a retrofit for the TL-R bi-xenon projectors with the flap for the highbeam and also have LED fog lights, the fog lights do not turn back on after they shut off when the high beam is turned on and then back off. You have to turn the lights completely off and then back on for the fogs to come back. But this only happens if your fog light bulbs are LED

Yeah, it is old, but it does have CANbus, so I figured I would ask. Since I'm planning on doing all that, including the LED fogs, so, I will keep that in mind. Thanks.

 

[Easter Bunny]

if you simply unplug the current bulb you can see if the car will give you an error

 

[Speedie6]

if you simply unplug the current bulb you can see if the car will give you an error

Duh, I shulda thunk a that.