[SOLVED] Mps sputtering

[MPS]

Hello everyone, i have some problems with my Mazdaspeed 3 bk, maybe you can help me.. i replace the turbo, everything was fine, couple of months after replacing i notice that car one day going very well, (slightly over boosting, faults in picture below ), i found that one hose for wastegate solenoid valve isn't attached to intake hose, i connected that hose, car was smooth again but not for long and it started twitching and jerking at aprox 2500-3000 rpms at steady throttle position, it have hesitation when accelerating, and i think no boost or very small boost, no fault codes now..any ideas what to check for? Car is bone stock

 

[Raider]

I would check the vacuum lines,boost controller too. Post logs if possible.

 

[MPS]

I would check the vacuum lines,boost controller too. Post logs if possible.

Thanks for responding, i found the problem, both hoses for intake flaps solenoid are cracked, i replace them, car goes like fury now

 

[Raider]

Yeah those look crusty!