New Corksport MS6 parts: 4" intake, front/rear camber arms

[Speedie6]

Just thought I'd mention some new MS6 parts from Corksport that I didn't see any announcement for.

First, they did in fact release an MS6 specific version of their 4" intake. Though I have no idea what the actual difference is between the MS3 version and the MS6 version. I've not had any problems using the MS3 version on my MS6. And in fact, the two main product pictures are identical pictures on their page selling the MS3 version and their page selling the MS6 version! So, I guess there can't be too much difference. But at any rate, they do now have an MS6 specific version listed on their site.

They have front and rear camber arms. I think this is actually a product re-introduction, I think they made them before. Not sure, but in any case, they are available. I have them on my car.

One other thing I thought I would mention, although it is for the MS3 and MS6, is their E85-safe HPFP O-Ring rebuild kit. I don't have this yet, but I should get it. I'm running 50/50 mix of 93/E85.

Mazdaspeed6 4 inch Intake (corksport.com)

Mazdaspeed 6/Mazda6 Rear Camber Arms (corksport.com)

Mazdaspeed 6 & Mazda 6 Front Camber Arms (corksport.com)

Mazdaspeed E85 Safe HPFP O-Ring Rebuild Kit (corksport.com)

 

[Speedie6]

Okay, so I got confirmation from Corksport that the MS6 version of the 4” intake is the same thing as the version for the MS3 except that the MS6 version comes with a longer BOV hose. Which is pretty much what everybody figured. The weird thing is, Corksport actually specifically claimed that there was fitment issues on the MS6 for the harness and coolant lines. And claimed that they would need to make an MS6 specific version. And now they say it fits just fine other than the BOV hose. So, I don’t really know why they initially claimed it wouldn’t work. Oh well. At any rate, I guess its a nonissue now.