Oil return line bolts

[GhostMS3]

Anyone know the part number for the return line bolts? The 2.5 has them listed but not the 2.3l. Will they still work?

 

[neganox]

Oil outlet tube bolt: 9XF0-02-127L

Other Names: Lower Bracket Screw, Oil Pipe Screw, Upper Insulator Screw, Oil Outlet Tube Bolt, Connector Tube Screw, Oil Inlet Tube Screw, Oil Outlet Tube Screw, Pulley Screw, Support Bracket Screw, Upper Insulator Bolt, Water Pipe Screw, Screw Flange

Description: 2.5L turbo, turbocharger & brackets. 2.5L turbo, pipes & lines. 2.5L non turbo. 2.3L, upper. 2016-18. 2018-19. 2.0L. 2019. 2017. With turbocharger.

.......maybe?

 

[GhostMS3]

9XF0-02-147L is listed as the lower bolt. I guess I can just order it and see if it works

 

[Mauro_Penguin]

The bolts that go on the turbo are ever so slightly shorter than the ones for the block. Which is why they are listed separate.

I dont have the part number for them but when the bolts that you ordered come in, take them to the hardware store and find some that are the same thread but with the adjusted length.

 

[jsmith]

I'd suggest just replacing with a stud. The bolts have a tendency to strip out since they arent using much of the threading.

Hole depth is 20mm, and is M6 x 1.0.

Dont have a drain line handy, but I'd think these would be long enough. https://www.mcmaster.com/93805A326/

 

[Awafrican]

I'd suggest just replacing with a stud. The bolts have a tendency to strip out since they arent using much of the threading.

Hole depth is 20mm, and is M6 x 1.0.

Dont have a drain line handy, but I'd think these would be long enough. https://www.mcmaster.com/93805A326/

Thanks for confirming

@Binary Assault this is the info I believe you were after in shoutbox