Product Idea

monkey.bones.007

monkey.bones.007

Chuckin' sausage like a hooker rubs dick
Greenie N00B Member
Greenie Member
I've got a supercharged Mustang and I need a spacer that will attach between the supercharger and the intake box for meth. Would you be interested in making a part for V8 supercharged Mustangs? I'm sure there is a good market for a part like this as Mustangs are errywhere. See the attached pic for reference, the silver part is where it would need to go. The dildo heat sink didn't have the desired effect of cooling the supercharger. @Farahan@DM
a373d82e205f8f0d222ff9b16dfb636c.jpg
3996a5f83097316ae14b1330f8c2a780.jpg


crapatalk it sucks for free
 
Last edited:
monkey.bones.007 said:
I've got a supercharged Mustang and I need a spacer that will attach between the supercharger and the intake box for meth. Would you be interested in making a part for V8 supercharged Mustangs? I'm sure there is a good market for a part like this as Mustangs are errywhere. See the attached pic for reference, the silver part is where it would need to go. The dildo heat sink didn't have the desired effect of cooling the supercharger. Farahan@DM
a373d82e205f8f0d222ff9b16dfb636c.jpg
3996a5f83097316ae14b1330f8c2a780.jpg


crapatalk it sucks for free
Click to expand...
@Farhan@DM
 
There were 4 wrecked Subbies just on Sat on the way from the picture at the damn back to the [emoji545].

Sent from my XT1575 using Tapatalk
 
If you're ever in Colorado ask anyone about Subaru drivers and you'll get the same answer, starts with a re ends with tarded.

crapatalk it sucks for free
 
monkey.bones.007 said:
If you're ever in Colorado ask anyone about Subaru drivers and you'll get the same answer, starts with a re ends with tarded.

crapatalk it sucks for free
Click to expand...

Same here, and it isnt just WRX/STI its everything they make

Edit: I live in Maryland since my profile only says earth
 
AYOUSTIN said:
Why not just drill and tap that pipe between the throttle and intake box?
Click to expand...
I've thought about that, but it is a flexible material and I'm not sure if after drilling through it would have any issues sealing if it flexed.

crapatalk it sucks for free
 
AYOUSTIN said:
Ah, wasn't sure if it was Al or a composite. I'd say if the wall thickness is 1/4" or greater you'd be fine to drill and tap it.
Click to expand...
It's thin, I'm not sure it's even 1/8" thick.

crapatalk it sucks for free
 
You must log in or register to reply here.
Back
Top