RaiderFab 1st Gen Mazdaspeed 3 Bumper Fitment Fix

****If you have ANY questions about the instructions, do not proceed until you contact RaiderFab! There is a chat option on raiderfab.com, email raiderfabusa@gmail.com, or message on social media, PRIOR to drilling holes or making any modification which cannot be undone.****

Gen1 MS3 Full Kit (fenderwell AND headlight area latches:
https://raiderfab.myshopify.com/products/2007-2009-mazdaspeed-3-bumper-fitment-solution-full-kit

Gen1 MS3 Fenderwell Only:
https://raiderfab.myshopify.com/pro...eed-3-bumper-fitment-solution-fenderwell-only

Gen2 MS3 Kit:
https://raiderfab.myshopify.com/products/polished-2010-2013-mazdaspeed-3-bumper-fitment-solution

About the latches:
Only 1 latch will be needed for the fenderwell kit per side. If the area is popping off under the headlights as well, you will want to order a pair of full latch kits as well, which will be in the link sent when you order. You can even order our fenderwell kit first, then if needed after, order the front latch later.

The goal is to go from the bumper falling off, to this:

The how-to will be updated to reflect the final design as needed, but overall, it is pretty similar to the prototype.

Only 1 latch will be needed for the fenderwell kit per side. If the area is popping off under the headlights as well, you will want to order a pair of full latch kits as well, which will be in the link sent when you order. You can even order our fenderwell kit first, then if needed after, order the front latch later.

Fixing your bumper fitment is as easy as 1, 2, 3!

1. Order your RaiderFab hardware and Quik-Latch latches (Mini Quik-Latch Assist Springs!
2. Install!.
3. Post to Instagram and Facebook, tagging RaiderFab, Mazdaspeeds.org,and Quil-Latch!!

So what comes with the RaiderFab/Maisonvi kit?

• A pair of the RaiderFab/Maisonvi stainless steel brackets
• A pair of custom length latch pins
• stainless steel washers and nuts to hold it all in place
• anodized black, red, blue, machined aluminum or polished latches
  
• Assist Springs

Raider's how-to is here:

http://mazdaspeeds.org/index.php?th...t-solution-for-mazdaspeed-bumper-issues.1689/

MSO user Youngwonder made a how-to as well:
http://mazdaspeeds.org/index.php?threads/how-to-raiders-bumper-fitment-fix-v2.2577/

Follow RaiderFab!
facebook.com/raiderfabusa
instagram.com/raiderfabusa
youtube.com/@raiderfab
twitter.com/raiderfabusa
tiktok.com/@raiderfabusa
Like Mazdaspeeds.org on Facebook: https://www.facebook.com/mazdaspeeds.org/ , Instagram: https://www.instagram.com/mazdaspeeds_dot_org, and on twitter: https://twitter.com/mazdaspeedsorg

My how-to is here:
http://mazdaspeeds.org/index.php?th...t-solution-for-mazdaspeed-bumper-issues.1689/

@Youngwonder made a how-to as well:
http://mazdaspeeds.org/index.php?threads/how-to-raiders-bumper-fitment-fix-v2.2577/

PICS of final product:

 

IN!

 

Count me in! #2

 

Woo glad this is working out. Im of course in.

 

Hmm - my bumper is only coming out under the headlight (both sides). Back portion is completely fine but I'm in either way

 

Count me in on this!

 

Hmm - my bumper is only coming out under the headlight (both sides). Back portion is completely fine but I'm in either way

Well if back is fine, order just the one for the front like I did in my how-to. That's my tip.

 

In like flynn

 

I'm in. Just need the rear since it tore out

 

Count me in!!!

 

Count me in. I was staying away because of the price point before, but 45 is cheap. My bumper is fubared.

So guess i need 2 <_<

 

Count me in. I was staying away because of the price point before, but 45 is cheap. My bumper is fubared.

So guess i need 2 <_<

Well you will need to get the latches as well, but those are a steal. Bumper fix for about $75 is 1/2 the cost I planned for, so I am thrilled to help so many who need em, plus rubber bands are stupid.

 

plus rubber bands are stupid.

Woof, yeah. My driver side corner pops out from time to time, so I grabbed a set of the bands since they were only $10 on Amazon...didn't realize how far they'd protrude from the bumper until I had them in hand to really see the dimensons. Needless to say, they're still hanging out in the toolbox and my bumper remains undrilled.

If mine was in worse shape than it is, I would be alllll over this deal at such a good price point for a much more attractive and effective fix. Luckily, the corner only pops out if I bottom out the front end hard enough to re-dislodge it (hate my driveway), and then sticks tightly enough in place on its own when I push it back in...I think only the very last tab broke and so it isn't a huge issue right now. Will probably be in on a future buy once the problem gets worse, though, or if the passenger side also goes bad.

 

Well if it gets worse, there is a solution.

 

Hopefully I will get the mounts in at the beginning to mid next week. I will test them out on my car to make sure we are all good and then I will send them off to Raider to add all the other bits to them and ship them to where its all going.

Just trying to give you all a timeline on how these things are going.

 

Checked tracking, I will have the latch pins today, then shipping a pair up to @Maisonvi tomorrow.

Update: all latch posts are here!
Sale/Ship date of 6/27 is planned.

 

I don't need it at all but if you make a gen2 model will order it anyway.

 

I don't need it at all but if you make a gen2 model will order it anyway.

@Faeker and I are hoping to have something soon.

 

I need these in my life!

Sent from my SCH-I545 using Tapatalk

 

as @Raider said, I'll be working on the Pu solution soon. I ordered the parts needed today. Once they arrive I'll start laying out a plan. I have a couple of ideas I'm going to try before posting much about it.