RaiderFab GenPu Bumper Fitment Fix for 2nd Gen Mazdaspeed

****If you have ANY questions about the instructions, do not proceed until you contact RaiderFab! There is a chat option on raiderfab.com, email raiderfabusa@gmail.com, or message on social media, PRIOR to drilling holes or making any modification which cannot be undone.****

****Final Bracket Design has 1 slot near the headlight area for use.

Use the back fenderwell area bolt location to install the fenderwell latch pin**** email raiderfabusa@gmail.com with any questions!****




Here are pics of the V1 brackets! Version 2 not have the 2nd slot, as the fenderwell bolt area is used for this kit.

This is the latch kit (various colors available)

 

Bumping this to the top. This is the official once we get 7 committed to buying.

 

@Harvey

 

I'll pay for 4 sets. Only 5 more people and its a go!

 

Need some people to make this happen!

 

Quick bump and a great how to has been created! Here is the how to which will get everyone set up. Thank you so much, @CMajor and @Sho. https://mazdaspeeds.org/index.php?threads/raiderfab-gen-pu-installation-guide.4661/

Sent from my SM-G930T using Tapatalk

 

I'm actually interested in this group buy, actually joined because of reading from the previous thread about the quick release for the bumper.

 

Sorry for the retarded question, I have the bumper fitment fix for the gen poop, what exactly does this fix? Am I just misunderstanding and it's the same thing?

 

Sorry for the retarded question, I have the bumper fitment fix for the gen poop, what exactly does this fix? Am I just misunderstanding and it's the same thing?

Its the same thing. The way the bumper clips won't hold in anymore & the bumper will have this huge gap between the fender.

 

Sorry for the retarded question, I have the bumper fitment fix for the gen poop, what exactly does this fix? Am I just misunderstanding and it's the same thing?

This fixes the loose fitment around the headlights by replacing the plastic bracket with this Murrican fabbed stainless steel. Just need latches. Plus this works with the fenderwell fix. Use it to hold the back part of the bracket

 

I'm actually interested in this group buy, actually joined because of reading from the previous thread about the quick release for the bumper.

Got you added!

 

Got you added!

Thanks Raider! Need to get the latches I have mounted up with some new brackets.

 

Sign me up

 

Yes one more person to get the ball rolling!

Sent from my Nexus 6 using Tapatalk

 

@taggart, got you. Only 3 more to make this happen!

Sent from my SM-G930T using Tapatalk

 

Is there enough interest to do a gen1 bumper fix group buy?

 

Is there enough interest to do a gen1 bumper fix group buy?

It's already out! http://mazdaspeeds.org/index.php?pages/store/

Link to buy direct from Quik-latch.com there as well. Also have a discount code in my thread for it here too.

Sent from my SM-G930T using Tapatalk

 

I will post more updates and edit this ASAP. This is for the next round of 10 bracket kits to fix the 2nd Gen Mazdaspeed headlight area from being loose and floppy. Cost will be $100 SHIPPED, including all stainless steel hardware needed to mount these. If I can get 25-50 people interested, rates go down, But for now, I am on a tight budget if we only do 10 kits. RaiderFab will take 3 spots, so only 7 people needed to sign up.

1st GB has info here:
https://mazdaspeeds.org/index.php?t...ed-bumper-fitment-fix-for-the-headlight.3383/

Install here: https://mazdaspeeds.org/index.php?t...mper-bracket-how-to-for-genpus-complete.4158/
We have a 30-45 day to ship estimate from close of the group buy. Probably a lot sooner.


****IF YOU BOUGHT THE RAIDERFAB FENDERWELL FIX, THIS WILL WORK FOR YOU AS WELL! OUR KIT WILL USE THE LOWER BUMPER BRACKET BOLT LOCATION TO HOLD THE BRACKET AND LATCH!****

Here are pics of the V1 brackets! Version 2 will have extended standoffs so 8mm spacers will not be needed. Will also not have the 2nd slot, which was there for Redline, who helped get these tested for the initial fab run.

SIGN UP! ADD YOUR NAME TO THE LIST TO HELP GET THESE MADE!
1) RaiderFab
2) RaiderFab
3) RaiderFab
4) RaiderFab
5) Harvey
6) modusoperandi
7) ataggart
8)
9)
10)

I will post more updates and edit this ASAP. This is for the next round of 10 bracket kits to fix the 2nd Gen Mazdaspeed headlight area from being loose and floppy. Cost will be $100 SHIPPED, including all stainless steel hardware needed to mount these. If I can get 25-50 people interested, rates go down, But for now, I am on a tight budget if we only do 10 kits. RaiderFab will take 3 spots, so only 7 people needed to sign up.

1st GB has info here:
https://mazdaspeeds.org/index.php?t...ed-bumper-fitment-fix-for-the-headlight.3383/

Install here: https://mazdaspeeds.org/index.php?t...mper-bracket-how-to-for-genpus-complete.4158/
We have a 30-45 day to ship estimate from close of the group buy. Probably a lot sooner.


****IF YOU BOUGHT THE RAIDERFAB FENDERWELL FIX, THIS WILL WORK FOR YOU AS WELL! OUR KIT WILL USE THE LOWER BUMPER BRACKET BOLT LOCATION TO HOLD THE BRACKET AND LATCH!****

Here are pics of the V1 brackets! Version 2 will have extended standoffs so 8mm spacers will not be needed. Will also not have the 2nd slot, which was there for Redline, who helped get these tested for the initial fab run.

SIGN UP! ADD YOUR NAME TO THE LIST TO HELP GET THESE MADE!
1) RaiderFab
2) RaiderFab
3) RaiderFab
4) RaiderFab
5) Harvey
6) modusoperandi
7) ataggart
8)
9)
10)

I defiantly want in on one I am Justin from the Mazda page on fb finally created an account

 

2 more to go! Share the link and let's wrap this up!

Sent from my SM-G930T using Tapatalk

 

I have an extra set of latches left with the original length hardware. I used a pair to complete the fender fix with the Raider FAb shorter pins. What else would I need besides the brackets to fix the headlight area?