Figured I would throw the bumper fitment solutions into a better organized location than the announcements. No banners, and will be at the bottom of the vendor section.
What we have is a solution for Mazdaspeed 3s of both generations for the fenderwell area of the bumper being loose. While a fix is possible for the Gen 1 for the front area around the headlight, the 2nd Gen (GenPu) is being actively developed.
RaiderFab is just the name I came up with after I had to go out on my own and come up with a fix for the fenderwell tab failure on the 1st Gen MS3. With help from @Maisonvi, who made a cad drawing of my crude specs, made a better bracket to confirm it would work, got a company to fab the brackets right here in Michigan...Murrica. The result of nearly 3 years of trial and error is the solution for the Gen1 Market.
2nd Gen, GenPu MS3 owners face similar issues, and @Faeker has helped prove the solution will work and at a very affordable cost.
Time for an update! October 2022 I lost my job. After 2 years of inventory issues and covid, etc my latch distributor closed shop. I decided to make this my thing. I was given full rights to his pics, and has been a huge help getting me going. Nearly December, my website is being made by me, I have all the legal stuff done too. I hope to open for sales soon!
I am also looking to expand to the solutions to anyone who has bumper issues. Just PM me and we can talk about how to make a solution.
Thanks, and look for more from RaiderFab in 2023
facebook.com/raiderfabusa
instagram.com/raiderfabusa
youtube.com/@raiderfab
twitter.com/raiderfabusa
tiktok.com/@raiderfabusa
What we have is a solution for Mazdaspeed 3s of both generations for the fenderwell area of the bumper being loose. While a fix is possible for the Gen 1 for the front area around the headlight, the 2nd Gen (GenPu) is being actively developed.
RaiderFab is just the name I came up with after I had to go out on my own and come up with a fix for the fenderwell tab failure on the 1st Gen MS3. With help from @Maisonvi, who made a cad drawing of my crude specs, made a better bracket to confirm it would work, got a company to fab the brackets right here in Michigan...Murrica. The result of nearly 3 years of trial and error is the solution for the Gen1 Market.
2nd Gen, GenPu MS3 owners face similar issues, and @Faeker has helped prove the solution will work and at a very affordable cost.
Time for an update! October 2022 I lost my job. After 2 years of inventory issues and covid, etc my latch distributor closed shop. I decided to make this my thing. I was given full rights to his pics, and has been a huge help getting me going. Nearly December, my website is being made by me, I have all the legal stuff done too. I hope to open for sales soon!
I am also looking to expand to the solutions to anyone who has bumper issues. Just PM me and we can talk about how to make a solution.
Thanks, and look for more from RaiderFab in 2023
facebook.com/raiderfabusa
instagram.com/raiderfabusa
youtube.com/@raiderfab
twitter.com/raiderfabusa
tiktok.com/@raiderfabusa
Last edited:
