Starting speed 6 with no key?

[lasangelos]

Now the car is totaled
I have the fob, but couldn’t get it to work even glued it back together & changed batteries, but it was torn apart when I found it in the middle console.

I just want the ignition to come on so I can uninstall the accessport & potentially reset the ecu to factory data ...

If I do the ol “hammer ina flat head” could I make it happen?

Any help is appreciated

 

[L337TurboZ]

Remove the ignition switch from the column and manually turn it to the on position. You only need the key to start the vehicle.

 

[lasangelos]

Remove the ignition switch from the column and manually turn it to the on position. You only need the key to start the vehicle.

I am so glad I asked
Thanks man!

 

[lasangelos]

Steering wheel is locked, can’t seem to get the ignition to turn, but it’s definitely got power.
Any help?

I completely remove the ignition from the column?

 

[lasangelos]

Alright so I made it this far
No key still
Still can’t get the switch to turn at all to get the accessories on

Any help?
Drill out the pins or what?

I thought maybe I’d need to press the brake or the clutch to turn it...
But not for acc right ?

 

[L337TurboZ]

Try just jumping the wires for the ignition switch with a jumper wire. I just suggested removing the switch cause I thought it was bolted in not riveted to the lock cylinder.