Stock washer reservoir - JMF + WMI Setup

[Speedhunter]

Hi !

I'm interest to go this way for my WMI setup ... I will take a JMF Intake Manifold + meth bung with part from Devil's Own for the pump and everything else. Can you tell me if I'm right and if I'm missing something just tell me thanks

Here the part :

- 4 x DO2 nozzles => http://www.alcohol-injection.com/en/...zzles-do2.html
- 4 port injection kit => http://www.alcohol-injection.com/en/...n-upgrade.html
- Check valve => http://www.alcohol-injection.com/en/...eck-valve.html
- Pump => http://www.alcohol-injection.com/en/...tion-pump.html
- 7/32" ID hose
- T connection
- Gallon 50/50 Methanol => https://www.renodepot.com/en/windshi...-fluid-0263051

Here the graph :

 

[neganox]

You have a progressive controller or boost switch? Depending on if you have a gen1 or gen2 you'll have to tap the washer tank differently.

 

[Speedhunter]

GEN1 ... and I will replace the check valve by the DO Solenoid

 

[neganox]

Stratified's setup for a Gen1:

Also be careful of additives in your windshield washer fluid if you intend to run what you linked above.

 

[Speedhunter]

Here the MSDS :

http://www.recochem.com/products/turbo_power_washer_fluid/windshield_washer_40c

I don't think it has a lot of additives

 

[Speedhunter]

so a good move with the WMI setup ???

 

[neganox]

so a good move with the WMI setup ???

Looks like you have all of the necessary parts assuming you have your controller picked out as well.

 

[Speedhunter]

Looks like you have all of the necessary parts assuming you have your controller picked out as well.

For the controller ...

Something like this : http://www.alcohol-injection.com/en/water-injection-parts/14-progressive-controller.html