The Damond Motorsports Mazdaspeed PI Adapter Kit pre-buy!

Matt@DM

Matt@DM

Approved Vendor
Pre-buy for our highly anticipated PI adapter kit is now live! Head on over to our website for more info and to get in on the action, and be one of the first to receive these kits.

https://damondmotorsports.com/produ...ection-adapter-pre-buy?variant=12561731190826

DSC01410.JPG
 
I friggin love you guys like a "fat kid loves cake."

Does the adapter plate bolt on to the head first like what Stratified did for the ecoboost engines, or will this be a single bolt through like your ST manifold adapter?

Either way, I'm excited!!!
 
Mauro_Penguin said:
I friggin love you guys like a "fat kid loves cake."

Does the adapter plate bolt on to the head first like what Stratified did for the ecoboost engines, or will this be a single bolt through like your ST manifold adapter?

Either way, I'm excited!!!
Click to expand...

It does not. That would require an even thicker adapter.

Eroler1 said:
Does the angle of the injector pointed to the valves or to the runners?
Click to expand...

Injectors are angled towards the valves.

5doorsoffury said:
So is this the same as the ST mani PI plate just cut for a stock style IM?
Click to expand...

Effectively, yes.

Easter Bunny said:
Will this make an awesome woosh woosh noise to make the panties wet?
Click to expand...

No, but it can support all the woosh woosh sounds your turbo of choice can
 
Stupid question, could you integrate it with jmf manifold? I mean 8 injectors why not!????!!!!
 
Anything is possible, no matter how completely and utterly unnecessary it may be.

@Farhan@DM would you guys consider selling the SS controller also? It would make life easy for us consumers since that's a fairly common unit. The In tank fuel pumps and choice of return/returnless is always different, but everyone seems to use the same controller for PI.
 
HAHAHAHA yeah I seen that, didn't Pablo used that manifold to reach 1000hp then sold it for 1300, lol
Just wanted to know if you can actually do it, I have a JMF v1 with 4 meth bung sending it to jmf cost $300 but I still wanted to keep the meth nozzle
 
PadreDave said:
Can this be used with a factory TMIC?


Sent from my iPad using Tapatalk
Click to expand...
It might. You'd need little brackets to bolt the front of the TMIC down (those would be easy). I'm not sure if the stock boost tube would still work with the throttle body, but I suspect it would.
 
Mauro_Penguin said:
Anything is possible, no matter how completely and utterly unnecessary it may be.

@Farhan@DM would you guys consider selling the SS controller also? It would make life easy for us consumers since that's a fairly common unit. The In tank fuel pumps and choice of return/returnless is always different, but everyone seems to use the same controller for PI.
Click to expand...
Yes, we are now set up to do that. We should probably get those added to the site, and product page.
 
You must log in or register to reply here.
Back
Top