-
-
Easter Bunny reacted to SyntheticAtmosphere's post in the thread Are you sitting comfortably? build with
Like.
Semi Update, I havent taken any time until today to really do some square 1 checks, but here it goes. First I took it for a drive... -
Bro... Your coffee looks like shit.
-
Easter Bunny replied to the thread Front passenger clunking low speeds.uhh if you are ever going to install the bushings you should do it before you put the arms on otherwise you are doing all of the same...
-
Easter Bunny reacted to Max626's post in the thread How-to: MS6 Seat Swap to Gen1 Seats (MSjuan6 Seats) with Like.
Excellent write up and I’d like to add some additional information if you plan on keeping the heated seats get a hog ring tool off...
-
Easter Bunny replied to the thread Front passenger clunking low speeds.Diamond motorsports has urethane bushings you can press in. I did it to my car it wasn't that bad once I warmed the bushings up and made...
-
Easter Bunny replied to the thread Front passenger clunking low speeds.got a picture?
-
Hehehehe, got to checking the diff, shes f***ked. On the magnetic drain plug came out some quite big chunks. If I remember I'll try...
-
Easter Bunny reacted to Crazycanadian's post in the thread P0234 Overboost Condition and P2187 lean at idle Troubleshooting with Like.
It's a Tial MVR wastegate.. the top is the vent.. 1 of the bottom ports is the control/boost reference port.. 2 of the bottom ports are...
-
Easter Bunny reacted to Cold Lotion's post in the thread Violent vibration and STFT swinging with Like.
Lots of misconceptions about how the AWD system functions. Any metal member can look at the technical training document...
-
Easter Bunny reacted to brandon19's post in the thread P0234 Overboost Condition and P2187 lean at idle Troubleshooting with Like.
Yeah that is understandable, but I would switch it over to the method I showed, it is one of the main benefits of being EWG. You should...
-
So its been a minute since ive updated this Fuel pump is in and wired - the filter element on the bottom is a different configuration...
-
Havent update this one in a while either Mrs DB replaced the headlights with some LED equivalents so she can actually see the road at...
-
Easter Bunny replied to the thread P0234 Overboost Condition and P2187 lean at idle Troubleshooting.do you have your stock map sensor to put back in? at spring pressure you are still in its range so you can determine if the CS one is...
-
Easter Bunny reacted to brandon19's post in the thread P0234 Overboost Condition and P2187 lean at idle Troubleshooting with Like.
Another thing worth adding, you have a dual port external wastegate so why not use both ports? If you have lower spring I would run any...
-
Easter Bunny reacted to Crazycanadian's post in the thread P0234 Overboost Condition and P2187 lean at idle Troubleshooting with Like.
You've gotta make sure your waste gate is opening and not getting hung up or something like that. Easy test.. run the boost reference...
-
-
Loading…
-
Loading…