Recent content by mr_mazda329

What oil return line are you using? -Aftermarket, check for kinks/clogs? -OE, check if clogged. It seems liked the turbo is being over-oiled if its bleeding out from the CHRA or you just have bad seals. Are you running less oil pressure with the oil feed OPR?

When running softer rates, you usually need to run longer springs to prevent bottoming out/coil bind. You can try a smaller bump stop thickness, but I don't recommend that because it can cause premature failure of the piston/seals if you hit a really bad bump. Plus, that shit is gonna hurt too...

Those dust boots will always fail. Get something like these if you want to protect your investment. I got a different brand on my Miata (Inertia Lab), but they should all function the same to keep direct water/dirt out and away from the shock piston...

I would have loved to see you apply more pressure to your buddy in the SIR. He might have let you pass on the main straight. He does very well to use all of the course to maintain his cornering speeds. Learn to get on the throttle sooner (rolling into it) vs coasting out and you'll see your...

Could always start a donation thread for him ???

Its very possible its helping depending on its location. What oil cooler did you install (specs/brand) and do you have any pics?

I wouldn't worry about heat wrapping it, now that it's installed. I'm going to do my dump and DP once I start this S5 install. I say if you notice significant warming by your feet on track, it may be worth it then.

The ATP will not mate up with the CS testpipe. ATP uses a flat flange and all CS stuff uses the donut style. I'd go with the CS or just go long DP.

He was replacing his OEM units because they were far past the point of repairing. All the Fade

And thennnnnnnn...? Exhaust Mani in July? Waiting on your official video to hear its unique "exotic" sound.

Post tits or ban

Nice. I'd give her a good shake down at an AutoX to be on the safe side before hitting the track event.

My 3 Cars not as they sit because I cant take pics of them (downrange life). All get used on the streets. 04 MSM AutoX/Track car. For AutoX, running SSM but going back down to BSP and doing more prep to be more competitive. Track is just an occasional HPDE. Nothing serious. 09 Speed3 is...

Wish we could get some more Tucson people who don't fizzle out.

Design features are much better than most out there for the speed3 platform. Not having the rear adjuster obscured by interior panels is nice. There weren't any dynographs sent, but I also didn't ask for any. My track results improved a fair bit. The car rotated much better than the BCs...