Search results

I have this for scaping gaskets... Lisle Gasket scraper Its a dream! Then I follow up with light emery if needed.

I believe the gauge is looking for a signal from a Hall effect or magnetic sensor in the form of a square tooth signal or oscillation. A pressure sensor would be a variable voltage signal. This is a assumption as I am not an engineer...just a geek.

Sloww pretty much covered it, you can have pressure and low flow. Pressure requirements also change with boost levels in the intake pipe. I am looking for a replacement for what was originally in the trinket-y AEM monitor kit. I can set high and low flow parameter alarms with the gauge which...

I ran into this problem before...The turbine meter in the AEM WMI monitor gauge deformed. Originally I mounted it in the engine bay and thought perhaps the heat was the culprit. I purchased a new one 4 years back and mounted it right off the pump in the front left behind the fog lamp (ambient...

I would like to see this in action/reality, but I havent been able to find any evidence. I seriously need to go this route if I were to go PI.

Schematics have AWD solenoid with 2 wires coloured R & R/B and temp sensor 2 wires with LG/B & LG Perhaps you have a connector for something else with 5 wires?

I dont recall for sure, but the 2 wire should go to a temp sensor on the left side of the diff. The other connector operates the diff clutch. I dont recall if its 5 wires.

The job of replacing the VVT is not a difficult undertaking. There are a lot of parts to remove to make access. I find Mazdas easy to work on, there always seems to be a way to get a tool in to do the job, but you cant be afraid to remove parts to get at what you want to work on. This is very...

As a part of my list of things to do on my holidays this year I chose to repair the VVT. I opted to purchase the OEM upgraded kit from CW Turbochargers. Then I added ARP cam & crank bolts and a Cometic timing cover gasket. Generally speaking everything went as planned. I assembled the parts...

Its great you got it finally sorted out, and you are better off with DM and Will!

That is a nice colour. The Speed6 will pop for sure! :thumbsup:

I have a basic cloth cover for indoor storage. I think I bought it at CanadianTire. However I have occasionally moved my car outside in the past and have been afraid to recover the car afterwards without washing it again. It dosent take long to get a garaged car dirty tho if uncovered. The...

Energy can only be transferred. Left to its own, it goes where it wants to, right? Will the LSD tighten the car up? Not familiar with LSD in FWD.

Keep the car and when your son gets to driving age have, him chauffer you around...thats my plan ;)

What is the chance you could put a heater in you're garage? Are you lucky enough the panel is in your garage? Princess puts a 5000W unit on sale regularly.

No worse than drag teams. They pull engines apart between heats, lol

Gran Turismo just dosent soothe the itch, eh?

Its never too late

2 thoughts... By coasting into the corner, the car is able to turn without the forward push from the engine or brakes affecting balance. Are you carrying more speed through the turn? With this motor you are able to put down 100% of the full throttle you are using on corner exit. The car might...

Good Luck, and have fun with it...Better than sitting at home! You never know, you might notice a few things that can help you once you are back up to full power cuz now you really have to work your skills, lol.