Atom's Speed6

[SyntheticAtmosphere]

What Prothane bushing/saddle P/N did you use? Ive been trying to sort this out on my car, but no one ever seems to give a part number.
Ive canvased the website and if I find one low enough in profile, the bolt holes arent right. Im about to make something custom, lol.

 

[SyntheticAtmosphere]

As if I dont answer my own question just after posting. I have been searching the web lookin at measurements and such off and on for about 2 weeks.
It was here all along.
19-1122 for OEM 23mm bar
19-1123 for Whiteline 24mm bar

Thread 'Prothane Rear Sway Bar Bushings/Brackets'

Sep 7, 2016

This info was gathered back in 2013. It came time to swap out a busted stock axle for a DSS one. In the process, I encountered a couple issues with sway bar bushing and bracket. After a couple attempts, we managed to find a good (cheap) alternative.

Obviously not all setups are the same, and some probably have never had any issues. @phate has provided awesome info in various other suspension threads as well if more info is needed.

Up front, these are what will work:
Prothane 19-1122 Red 23 mm Universal Sway Bar Bushing fits A Style Bracket
They are just...

• ms6mil
• Replies: 1
• Forum: Mazdaspeed 6 Suspension & Brakes

• 

 

[Atoms4Piece]

What Prothane bushing/saddle P/N did you use? Ive been trying to sort this out on my car, but no one ever seems to give a part number.
Ive canvased the website and if I find one low enough in profile, the bolt holes arent right. Im about to make something custom, lol.

Sorry about that. I try to not forget part numbers. That part number is correct, but you will still need to modify the bracket and the bushing on the driver side due to the offset of the axle. I saw that someone on youtube (Wannabe Tuners if I recall) was able to use the Whiteline bushings that come with the RSB, but they had to shave down that bracket even more than we had to on the Prothane set.