DevilsMS6
Greenie N00B Member
Disclaimer: This is not going to be a fast build, you have been warned. LOL
First the Plan
HP Goals: 500-600 to start. Once a weekend warrior skies the limit.
Fuel: 50/50 E85 mix with Port Injection
Engine Specs – Going Big Bore
CP-e Stage 3 Pistons - 90mm 10.5:1
Manley Pro Series Turbo Tuff I beam w/ARP 625+
Block sleeved with Darton MID Wet Sleeves
Crank Balanced and keyed
CorkSport Cams Pinned (If they ever come back out, haven't lost hope)
+1 intake and +2 exhaust valves
70lb Valve Springs
Head ported intake and exhaust by Speedperformance
12MM H11 head studs
Turbo
EFR7670 T4 Twin Scroll IWG
Supporting Parts
PnP JMF Intake Mani V2 Port Injection w/ SP injection kit or CP-e depending on test results
Custom Top Mount Exhaust Mani
Custom 3” DP with Custom 3” CBE
Custom Water to Air Intercooler
Lots and Lots of other little parts and pieces.
Current Progress
Plan is to build this motor on the side, already have spare long block on hand and pistons. I will be sending the block out shortly for sleeves, and head out for head work. In the mean time I will continue to gather parts and pieces. I will update this thread with pictures and progress as I move forward with this build. Hoping to have motor finished by the end of the year and all parts in hand.
First the Plan
HP Goals: 500-600 to start. Once a weekend warrior skies the limit.
Fuel: 50/50 E85 mix with Port Injection
Engine Specs – Going Big Bore
CP-e Stage 3 Pistons - 90mm 10.5:1
Manley Pro Series Turbo Tuff I beam w/ARP 625+
Block sleeved with Darton MID Wet Sleeves
Crank Balanced and keyed
CorkSport Cams Pinned (If they ever come back out, haven't lost hope)
+1 intake and +2 exhaust valves
70lb Valve Springs
Head ported intake and exhaust by Speedperformance
12MM H11 head studs
Turbo
EFR7670 T4 Twin Scroll IWG
Supporting Parts
PnP JMF Intake Mani V2 Port Injection w/ SP injection kit or CP-e depending on test results
Custom Top Mount Exhaust Mani
Custom 3” DP with Custom 3” CBE
Custom Water to Air Intercooler
Lots and Lots of other little parts and pieces.
Current Progress
Plan is to build this motor on the side, already have spare long block on hand and pistons. I will be sending the block out shortly for sleeves, and head out for head work. In the mean time I will continue to gather parts and pieces. I will update this thread with pictures and progress as I move forward with this build. Hoping to have motor finished by the end of the year and all parts in hand.