72mm Throttle Body...and it works

Do you want this; Do you need this!?

  • Total voters
    48
neganox said:
Stop selling shit via PMs.
Click to expand...

He was kidding, Tim's been trying to get it from me ever since he found out I had it.

Feel free to block him from the entire website for doing so though
WaryQualifiedFeline-size_restricted.gif
 
5doorsoffury said:
Ive been blueballed..... the oring on oring action is a no go so this can't be used on a st mani.. sonofabitch...
Click to expand...

Speed solutions is making an adapter to go between the cs tb and st mani.
davychronic said:
Pretty sure the hole on the st mani is too small
Click to expand...
Stock manifold is much smaller and it works on that. and jmf isnt much bigger (unless you get the 75mm jmf tb opening). Works on those
 
Sho said:
Speed solutions is making an adapter to go between the cs tb and st mani.

Stock manifold is much smaller and it works on that. and jmf isnt much bigger (unless you get the 75mm jmf tb opening). Works on those
Click to expand...

Is the OEM manifold big enough to allow the corksport throttle body to open allow the extra flow in? I've never bothered to measure the OEM manifold opening, and I'm too lazy to dig through the old forum for the specs. I'm curious about the off throttle hesitation you get with it.
 
Mauro_Penguin said:
Is the OEM manifold big enough to allow the corksport throttle body to open allow the extra flow in? I've never bothered to measure the OEM manifold opening, and I'm too lazy to dig through the old forum for the specs. I'm curious about the off throttle hesitation you get with it.
Click to expand...

I just placed an order for one so if no one posts pictures or measurements I can but it will take a week before it makes it to Canuckada. I have a spare stock manifold laying around I can use for reference.

I was planning to buy the CS manifold but it sold out fucking fast...
 
Mauro_Penguin said:
Is the OEM manifold big enough to allow the corksport throttle body to open allow the extra flow in? I've never bothered to measure the OEM manifold opening, and I'm too lazy to dig through the old forum for the specs. I'm curious about the off throttle hesitation you get with it.
Click to expand...
@Sho is currently running it on a PNP oem mani, though i don't know if the tb inlet is ported or just the runners. maybe he can chime in with his impressions.
 
SharksInSpace said:
@Sho is currently running it on a PNP oem mani, though i don't know if the tb inlet is ported or just the runners. maybe he can chime in with his impressions.
Click to expand...

Peep my build thread. Theres a few theories about the off throttle jerking in there. One being John suggesting I try different springs in my bov, and the other being my tuner point out some tables that aren't available in ATR, but are available in VT and Mazda Edit
 
You must log in or register to reply here.

Similar threads

CorkSport - Derrick
  • 0.00 star(s)
72mm Throttle Body Spacer
Replies
0
Views
1K
CorkSport - Derrick
CorkSport - Derrick
  • 0.00 star(s)
P2101 throttle body actuator range performance
Replies
9
Views
1K
Awafrican
Awafrican
Turbojohnny
  • 0.00 star(s)
Poor startup and no throttle response
Replies
9
Views
1K
Turbojohnny
Turbojohnny
  • 0.00 star(s)
Light throttle cruise stumble
Replies
8
Views
951
Crazycanadian
  • 0.00 star(s)
Hard jerk under WOT /half throttle
Replies
2
Views
423
AutocrossFiend
Back
Top