All The Turbos EFR9180 Edition version 2.0

[Enki]

You need to tape some LEDs around the inlet to light that thing up.

 

[PoonFlavoredTang]

You need to tape some LEDs around the inlet to light that thing up.

if there wasn't a way to rice out an engine decked with a 9180 you found it. ha. Tho good idea. What color?

 

[Enki]

White. If you do blue or red, you can't have it on when driving.

 

[PoonFlavoredTang]

can't believe I'm considering it

 

[Enki]

You need a "JET INTAKE" sticker to go next to the scoop that points at the turbo too.

 

[PoonFlavoredTang]

well that's a little too ricey. I'm not a fan of stickers.

 

[Enki]

You sure?

 

[Maisonvi]

You probably could have pointed that forward and run an intake on it I think. I know you are talking blow though, but depending on how that goes looks like there is room for a maf housing and shorter filter in front.

 

[Marcus almanza]

This write is crazy. How is this bw turbo working out so far! @Poon_Flavored_Tang


Sent from my iPhone using Tapatalk

 

[PoonFlavoredTang]

You probably could have pointed that forward and run an intake on it I think. I know you are talking blow though, but depending on how that goes looks like there is room for a maf housing and shorter filter in front.

Yeah he done that with a purpose just in case. I'm about 99 percent positive I can get blow thru to work. I have a plan of attack that involves using 2 mafs.

This write is crazy. How is this bw turbo working out so far! @Poon_Flavored_Tang


Sent from my iPhone using Tapatalk

I'll let you know as soon as everything is done. It's still a pretty good chunk of time away before it's road ready.

 

[Marcus almanza]

Is it twin scroll?


Sent from my iPhone using Tapatalk

 

[Enki]

Not with a vband inlet it aint.

 

[PoonFlavoredTang]

Not with a vband inlet it aint.

yeah it's not. Don't want to over complicate an already tight ass fab job.

Plus want the top end of the open scroll. I may Rev this thing out to 8500rpms.

 

[Enki]

Usually you match a twin scroll with larger AR for exactly that reason. Cake + eat it, etc.

 

[PoonFlavoredTang]

Yeeeeah I'm not sure how much more housing room I have left. The bw housings are kinda wide

 

[Enki]

Yep, understandable. Not knocking your choice by any means, just clarifying.

 

[ConeKiller]

Yeah he done that with a purpose just in case. I'm about 99 percent positive I can get blow thru to work. I have a plan of attack that involves using 2 mafs.

Sounds like some fancy signal interrupt type sensor setup.
Do tell.

 

[PoonFlavoredTang]

Sounds like some fancy signal interrupt type sensor setup.
Do tell.

LOL patience it'll be revealed soon enough. I really have no choice to make it work b/c I'm having the FMIC fabbed for it.

 

[ThatRed68]

Is there a concern with having that much heat right on top of the TMM? Or do you plan to switch to a solid one?

 

[Enki]

Radiant heat shouldn't be that big of an issue, esp with gold foil, ceramic coatings and the like.