EGR electrical question.

[AboveAverageJoe.]

If you don't have a Accessport and you remove the EGR, could you solder a resistor or some thing to trick the CEL light. into staying off?

 

[Raider]

Yes, people have. Get Versatuner for like $300 and a tune though.

 

[AboveAverageJoe.]

So there is no way to trick the ECM without a tune and the Versatuner? I was thinking something more like this.

Template public:_media_site_embed_youtube not found. Try rebuilding or reinstalling the s9e/MediaSites add-on.

 

[Raider]

If you remove or block the egr, it will cause a CEL. Now a resistor may work But if not, it can be bypassed with the programmer.

 

[AboveAverageJoe.]

If you remove or block the egr, it will cause a CEL. Now a resistor may work But if not, it can be bypassed with the programmer.[/QUOTE

Major Noob quetions,
If a programmer is used will it need to stay plugged it when ever the vehicle is driven or does it alter the ECM/OBDII, etc permanently?
Will I need to reprogram if the battery dies or is disconnected?

 

[Raider]

Nope, yes it changes the ecu, no on reprogramming. Look up VersaTune in the Approved MSO Tuning Vendors section

 

[AboveAverageJoe.]

Checking it out right now.
[doublepost=1555460020][/doublepost]The Versa Tune website has opened a can of worms in my head. I'm sure I'll be asking questions of Versa Tune in the Tuning Vendors section.

 

[AboveAverageJoe.]

Laptop acquired, Versa Tune free downloaded and OBD Link cable on it's way.