Engine Bay Photo Thread

[Castillo817]

As she sits as of now.

 

[Redline]

As she sits as of now.

Any measurable IAT or BAT differences with that radiant-reflecting wrap on your intake and FMIC piping?

 

[Natey]

Here's a change of pace

It's dirty but it sings a sweet song. Kinda like Amy Winehouse

 

[Castillo817]

Any measurable IAT or BAT differences with that radiant-reflecting wrap on your intake and FMIC piping?

Not significantly, but I did see lower numbers when I installed the tape. I know it takes longer for BATs and IATs to rise.

 

[Redline]

Not significantly, but I did see lower numbers when I installed the tape. I know it takes longer for BATs and IATs to rise.

Spray some methanol and it'll plummet those temps with a quickness, even in our DFW high summertime 100+ temps

 

[Castillo817]

Spray some methanol and it'll plummet those temps with a quickness, even in our DFW high summertime 100+ temps

Haha would love some meth. Will spray for cooling once funds are available

 

[Maisonvi]

Rechargeable Harbor Freight one. Works well though. I have also used it plugged in, as it is a little brighter then.

Your HF light works when plugged in? Mine wont turn on when its plugged in.

 

[Raider]

Yeah. So when it is dead, it can still be used.

 

[Cyclist20]

I need to clean it, and she is not as fancy as your front mount folks, but she is mine and l love her

 

[Maisonvi]

Yeah. So when it is dead, it can still be used.

Shit, I got jiped, when mine is dead, I have to wait for it to charge up enough to use. Maybe I will take it apart and see whats going on.

 

[getemslough]

I have a ton if cleaning up to do

 

[tyoung_ms3]

Nothing crazy. I like it though. Needs more wire tuck

 

[not_your_moms_6]

Not too flashy.....

 

[rodiii93]

I need to clean it, and she is not as fancy as your front mount folks, but she is mine and l love her
View attachment 709

Hey man what did you do to attach the stock tmic shroud piece to your cpe tmic ? The plastic piece that protects the Fuel pump

 

[Cyclist20]

Hey man what did you do to attach the stock tmic shroud piece to your cpe tmic ? The plastic piece that protects the Fuel pump

I cut it off my stock shroud leaving enough flat surface to attach underneath the CPE shroud. Then just marked and drilled holes, went to my local ACE Hardware and picked up some nuts/bolts. Easy peasy.

 

[alexwlwsn]

Let's keep this thread alive! I have lots of wires/vac lines I'd like to hide but it's good looking to me.

 

[TRBLSM]

Sent from my iPhone using Tapatalk

 

[Dedlyvirus]

Trying to keep this thread alive. I like all the pictures. Here's what I have done so far.

 

[VoodooJef]

Converting blue to red/black. She`ll be prettier here in a few weeks

 

[Maisonvi]

Converting blue to red/black. She`ll be prettier here in a few weeks

That red came out really good man.