Eric’s 10 Speed 3 build

Eric Ganger

Eric Ganger

Greenie N00B Member
A04D2262-1622-4480-BF03-2A850A1CC08E.jpeg Hey guys figured I would be more active on this page, so I decided to document my journey. So 2018 I gambled with the stock block and BNRS5 with Kozmic 6th port kit. I knew the risk but told PD tuning to turn it up lol so after about 2 months and endless pulls at 28psi she spun a bearing during a race against a 5.0 ( I put 3 cars on him ). So at this point I already knew I wanted to get my block built. After 4 months an opportunity came up that I couldn’t pass up, so I ended up buying a built motor from a local guy known as Jr Reidenbach. So now it’s time to put all the small things on the new engine and powder coat some things and I’m wanting to have the most efficient and fastest BNRS5 car with proven data to back it up. So this is where I’m at now and look forward to this journey!
 

Attachments

  • BD73EC2E-20E1-408A-B81B-703E0217E2E8.MOV
    BD73EC2E-20E1-408A-B81B-703E0217E2E8.MOV
    4.8 MB · Views: 20
  • 4FFC062F-E1C3-48CC-A758-6935C378E72F.jpeg
    4FFC062F-E1C3-48CC-A758-6935C378E72F.jpeg
    1.2 MB · Views: 28
  • 39AD1DF5-1017-4ED8-AFC8-2A240BFAB768.jpeg
    39AD1DF5-1017-4ED8-AFC8-2A240BFAB768.jpeg
    2.1 MB · Views: 29
Sho said:
What up, Eric! Good to see ya here!
Click to expand...
Good to be here! Definitely trying to figure out what fueling route I want to take. Thinking of the hellcat pump and a radium surge tank right now. Does anyone have suggestions?
 
Sho said:
For simplicity, skip the surge tank and just have Shedbuilt/ @KingScumbag do a hellcat pump in the stock basket for you. Add a splitter/distribution block in the engine bay to feed the hpfp and PI rail from it
Click to expand...
Any brands for the distribution block that you recommend? What would be the power limit this is good for?
 
Eric Ganger said:
Any brands for the distribution block that you recommend? What would be the power limit this is good for?
Click to expand...

We were sitting at over 650hp on my car. The pump was barely sneezing. We were limited by the wastegate so we never ended up journeying any higher. But it's plug and play. All you need to do it run a return line and split the stock feed line like @Sho said.
 
Sho said:
Bump
Click to expand...
UPDATE! After a lot of back and forth thoughts I ended up picking up a speed 6 for super cheat with no rust and quickly decided that I wanted to put my built motor in it. So unfortunately I will be selling my speed 3 with a healthy stock motor. So I’ll probably make a new thread or just rename this and get a bunch of updates rolling out
 
Eric Ganger said:
UPDATE! After a lot of back and forth thoughts I ended up picking up a speed 6 for super cheat with no rust and quickly decided that I wanted to put my built motor in it. So unfortunately I will be selling my speed 3 with a healthy stock motor. So I’ll probably make a new thread or just rename this and get a bunch of updates rolling out
Click to expand...
Cool news! Upgrade your membership and post it in the for sale section, when ready. Details are in your welcome pm from me. :)
 
You must log in or register to reply here.
Back
Top