Leaking Coolant Hardline

[blinx]

Recently putting my build together on my Speed3 and it seems I've shaken a rusted coolant line into a small leak, figured I'd replace when I'm in there but not quite sure which part to buy. Any advice on which part# I should be looking at to replace the hardline? Pics below, thanks for any help!

Late Edit: Part# is L33X-15-190

 

[blinx]

Update for if anyone finds this with the same issue: appears like the part # is L33X-15-190, I'll edit to confirm once I receive it, was a bit of a pain to find.

 

[phate]

I find the same part #, I think you're safe lol.

 

[Jeff695]

Update for if anyone finds this with the same issue: appears like the part # is L33X-15-190, I'll edit to confirm once I receive it, was a bit of a pain to find.

Is this the hardline where the turbo coolant feed connects to like in the Imagine below?

 

[blinx]

Is this the hardline where the turbo coolant feed connects to like in the Imagine below? View attachment 34053

Sorry for late response. Yes, this pipe also connects to the turbo coolant line.

 

[LightSpeed]

That thing is held together by thoughts and prayers,

L33X-15-190, is indeed the Water Bypass Pipe

Make sure to get the matching O-ring (usually 9954-10-1407 or included with the pipe) where it seats into the engine block/thermostat housing area.

A new pipe with an old, flattened O-ring will leak.

 

[felipeflores4648]

That thing is held together by thoughts and prayers,

L33X-15-190, is indeed the Water Bypass Pipe

Make sure to get the matching O-ring (usually 9954-10-1407 or included with the pipe) where it seats into the engine block/thermostat housing area.

A new pipe with an old, flattened O-ring will leak.

I have someone that have this for sale in good and excellent condition PM derickdonald99@gmail.com if you’re still interested thank you.


Sent from my iPhone using Tapatalk