Mazdaspeed6 Street RMM Bushings

Matt@DamondMotorsports

Approved Vendor
We low-key released something at the beginning of the year. We now offer a street bushing option for the Mazdaspeed6 Rear Motor Mount! This is going to be great for those wanting to increase performance but don’t want as much added NVH. Like all of our mounts, we also sell just the bushings, so if you’re already running our mounts, you’re able to just get the bushings and swap them out.

1768595957896.png

For this particular mount, it’s only the rear bushings that we now offer in the street stiffness. The front bushings of the mount are still the “race spec”. If you’re wanting to get just the new street bushings that are positioned in the rear of the mount, use the discount code “justtherearbushings” on the replacement bushing product.


This also applies to our Fiesta ST RMM and our Hyundai/Kia RMM, since these bushings are used in these mounts as well. So if you have a Fiesta ST or Hyundai/Kia and have been running our RMM, you can get these replacement bushings as well. As mentioned above you can get just the new street rear bushings by using the discount code “justtherearbushings” and selecting the mount on the replacement bushing page.
 
Just FYI, I've got the regular racing mounts, full set for the MS6. And I personally notice ZERO vibration. I could not be more pleased with my Damond Motor Mounts. I initially had AWR mounts, and they were utterly dreadful.

When I first installed the Damond, before they were broke in, there was a small amount of vibration. But only a small amount. Even brand new, they were 1000 times better than the AWR. And after break-in, ZERO. Couldn't possibly be any better.
 
Back
Top