Tuning Excel Files

I have made and tweaked a couple Excel files over the years to help me with tuning. I figured they could be helpful to others as well.

MAF Cal

WOT Tuning

If you have any questions or suggestions, please let me know. I welcome the feedback!
Hey man so I just did basically my first real WOT 4th gear datalog and figured I would share it with you and see what you think. It was my first one and I don't have ATR yet so no MAF Calibrations or anything yet. Tell me what you think! Keep in mind also that I'm on a AP V3 93 octane Stage 3 OTS Map as well.
[doublepost=1526613074][/doublepost]Also my apologies for them being a mess! I will most definitely be learning how to organize them on a spread sheet in Excel and hopefully learn to read them pretty efficiently. I also have a 3rd-4th gear pull which hit a closer boost target at about 17.7psi instead of the 16.99 or whatever it was. My stock turbo is probably worn out though at my really high mileage.
 

Attachments

Hey man so I just did basically my first real WOT 4th gear datalog and figured I would share it with you and see what you think. It was my first one and I don't have ATR yet so no MAF Calibrations or anything yet. Tell me what you think! Keep in mind also that I'm on a AP V3 93 octane Stage 3 OTS Map as well.
[doublepost=1526613074][/doublepost]Also my apologies for them being a mess! I will most definitely be learning how to organize them on a spread sheet in Excel and hopefully learn to read them pretty efficiently. I also have a 3rd-4th gear pull which hit a closer boost target at about 17.7psi instead of the 16.99 or whatever it was. My stock turbo is probably worn out though at my really high mileage.

If you're just interested in an easy way to look at a log I'd check out a website called Datazap. You can upload your logs there and it plots it out into a graph. Here's your log on there for instance:

https://datazap.me/u/irate/log-1526617894?log=0&data=4-22
 
If you're just interested in an easy way to look at a log I'd check out a website called Datazap. You can upload your logs there and it plots it out into a graph. Here's your log on there for instance:

https://datazap.me/u/irate/log-1526617894?log=0&data=4-22
Oh ok awesome thanks man and I guess I just need to know what to start out with. I mean I can obviously tell if I am achieving boost targets and all that but like what maf voltage range to be in and what effects not being in the correct parameters will cause
 
Back
Top