734 AWHP and 9000 RPM Mazdaspeed6 Dragcar

Farhan@DM

Approved Vendor
Finally got this car put together and on the rollers to get tuned. Took all day to get the standalone tuned and running properly, but it was worth it. 734 AWHP on a mustang, and power all the way out to 9k.

I've never driven anything with half this power, so I got some learning to do. It's going to be a few weeks before we can start making soft passes at the strip to get it dialed in, but we'll try to keep you guys updated.

Yes, it is testing the MS6 TMM.

Template public:_media_site_embed_youtube not found. Try rebuilding or reinstalling the s9e/MediaSites add-on.
 

Attachments

  • Resized_20180530_143101.jpg
    Resized_20180530_143101.jpg
    176.9 KB · Views: 58
Wow!

What cams and fuel are you guys running?
Stg3 Total MPS cams from @Freektune; Fuel is E98, because fuck it. I actually wanted to do some testing with E85 (because we're probably not burning all the E in 98), but we ran out of time.

In for the fueling kit.
Fuel is from a kit we've been working on for a little while. Dual Walbro 450 in a Damond surge tank.
 
I’m probably just missing it, but do you guys have a build thread for this? I’m assuming you ported the head, what option did you go with for valves and springs?
 
Back
Top