Hellcat Fuel pump basket

Maisonvi

Maisonvi

Grass-Roots Vendor
Platinum Member
@JohnnyTightlips is going PI and wanted to upgrade his fuel pump. Ended up sending me the parts to make him a basket set up like I had back in my speed. Keeps the pump on the bottom of the basket to avoid starvation (I never had an issue). Stock line is used as a return and in this case an 8an feed line (mine was 6 an).

This one just needs the fuel safe heat shrink to get in and should be good to go.

Let me know what you all think

87082483_613121896191105_7902712521532899328_n.jpg
20200220_133206.jpg 87082483_613121896191105_7902712521532899328_n.jpg 87410387_2541418912635001_4161459341410435072_n.jpg 20200221_161640.jpg
 
Last edited by a moderator:
Isn't that going to crush/kink that supply when it compresses down into the tank?

It compresses a way when installed.
 
Last edited:
KingScumbag said:
Isn't that going to crush/kink that supply when it compresses down into the tank?

It compresses a way when installed.
Click to expand...

Yeah have been meaning to update this. We adjusted the design to make it so the pump was always at the bottom of the basket no matter where it what. Hopefully this will solve any fuel starvation issues.
 
How much for one? Looking to swap ITFP to a hellcat pump when it comes in from graveyard.
 
How big where the corrugated lines? There are a couple of choices 8mm - 10mm

Maisonvi said:
Are you looking for just the holder? the whole pump basket swap? or the holder, hose, fittings and what not?
Click to expand...

Install I can do myself,
just wanting the holder,
so I dont have to rig it and risk it failing.
And maybe the style of hose used, I know what it looks like but is it just corrugated fuel line?
 
Last edited by a moderator:
Djslowbro said:
Install I can do myself,
just wanting the holder,
so I dont have to rig it and risk it failing.
And maybe the style of hose used, I know what it looks like but is it just corrugated fuel line?
Click to expand...

Yep, uses submersible rated fuel line, a 6an bulkhead fitting, fuel rated shrink wrap for the wires and then my holder.
 
Maisonvi said:
Yep, uses submersible rated fuel line, a 6an bulkhead fitting, fuel rated shrink wrap for the wires and then my holder.
Click to expand...

I found everything I needed, but can I purchase one of your holders from you? Just need to know how much and where to send you money lol
 
Djslowbro said:
I found everything I needed, but can I purchase one of your holders from you? Just need to know how much and where to send you money lol
Click to expand...

Yep, $80 shipped. PM me and we can work out paypal details and shipping addy.
 
You must log in or register to reply here.
Back
Top