is that just a replacement center section for the axles? so you just rebuild the explorer ones and are good to go? thats pretty slick if that is the case
LS RX8 Build - Project Doritno
- Thread starter JohnnyTightlips
- Start date
- Watchers 18
JohnnyTightlips
Motorhead
You rebuild the axles , rx8 on the hub side and explorer on the diff side. This is the reason I needed the axles from the junk yard too. They have a lifetime warranty on their cv axles so if it brakes they send you a new center section. You also need to weld their section to the existing subframe which also stiffens up the subframe a lot. This will allow be to get rid of the PPF "power plant frame" that connects the trans to the diff. I will need to fab a trans mount but that does not look too hard. I could in theory run true dual exhaust if I wanted with the new space u there. It is a pretty cool setup and should handle way more power than I will be making. The have really nice instructions. http://www.hottubsippinbubbly.com/Ronin/RX888install.pdf
Similar threads
