I think it's your fault. You bought the car from @Mastermind46; which was your first mistake.
Sent from my SM-N960U using Tapatalk
Masterminds old speed build
- Thread starter kennyfish
- Start date
Sent from my SM-N960U using Tapatalk
Mauro_Penguin
Punk in Drublic. #BlackLivesMatter
Motorhead
Platinum Member
Greenie N00B Member
Greenie Member
What exactly did you expect from ground control, and what didnt you like about their stuff?
They are definitely known to send wrong parts, but they always fix whatever they goof.
They are definitely known to send wrong parts, but they always fix whatever they goof.
I won’t be doing that install until I pull the engine to be built if all goes as planned that will happen this coming winter
Sent from my iPhone using Tapatalk
You know your shit will explode once the wrench @Mastermind46 left in the intake makes its way into the turbo. You'll be building in 2 weeks.
Sent from my SM-N960U using Tapatalk
Bruh, it is only a 10 mm. Same one I took out of the Rodeo tstat.
On the way to work Wednesday morning, coming to a stop the car zzb'd, downshifted at about 40 mph to slow down for traffic and the car jerked, started billowing smoke, and died. Got it off to the side of the road and towed it home, yesterday I pulled the plugs, which were soaked in oil, drained the oil and it was full of metal shavings, car still starts runs and drives but it dumps smoke faster than snoop dogg on 4/20. It's time to build, car will be going in the garage to start tear down, I'm looking at 18-24 months to build, my end goal will be 600-650. I will update this thread as I begin the build process and document where I go with the car.
@kennyfish has done the impossible, he found @Mastermind46 10 mil socket that was left in the intake. He has said there are more. Let me know when you need some help tearing shit apart or putting it together and I'll swing by and help. I'll also not leave 10 mil sockets in the motor. I will lose 10 mil sockets though.
I don't plan on starting on it until some time in September, I'm looking at least 9-12 months of savings before I even start to gather parts. I'll probably get a long block from speed performance and a clutch to get it at least back driving by next summer........... I can save for port injection and bigger turbo and stuff later on down the road. I should be able to have it back up and running by this time next year. So there really isn't any reason to pull the motor until I ready to order the long block/clutch.............
Old man Kenny yelling at kids to get off his lawn as he walkers over to get into his vette.Well unfortunately I didn't rebuild. The wife's dealership offered me a stupid trade it and a deal I couldn't refuse.....
Sent from my LM-Q610(FGN) using Tapatalk