Mazdaspeed 3 remap

[MPS]

Hello, i hear that some mazdaspeed 6 have 276hp for US market, does anyone have that ecu file maybe? I have stage 1 that my buddy made for me and would like to install-copy that 276 hp ecu map, just to compare it with my stage 1 map

 

[jsmith]

You are going to have a bad time if you blindly start swapping maps.

 

[roli1206]

Hello, i hear that some mazdaspeed 6 have 276hp for US market, does anyone have that ecu file maybe? I have stage 1 that my buddy made for me and would like to install-copy that 276 hp ecu map, just to compare it with my stage 1 map

every stage 1 got more steam than the "stronger" map

 

[Easter Bunny]

Why wouldn't you just get a custom tune

 

[Enki]

 

[Mateo@CS]

Highly recommend to just get a protune.

 

[Easter Bunny]

Highly recommend to just get a protune.

Not from dramatune

 

[MPS]

Why wouldn't you just get a custom tune

I have custom tune, just want to compare it, seems to me that this custom tune doesn't have torque on lower rpms like stock, after 4000 rpms pulls hard enough, i can share tune if someone needs it, it's not to aggressive because i don't have hpfp installed yet

 

[Enki]

This is a better question for your tuner. You know you can ask them what the differences are, right? You can also ask them to beef up the low end torque, and if they refuse, you can just go to another tuner that will do what you ask.

 

[Easter Bunny]

Who is your tuner and what the hell are you thinking running a tune without a hpfp upgrade

 

[Enki]

Who is your tuner and what the hell are you thinking running a tune without a hpfp upgrade

I missed that. Explains why there's reduced torque on the map.

 

[MPS]

You are going to have a bad time if you blindly start swapping maps.

Don't want to swap, just compare

This is a better question for your tuner. You know you can ask them what the differences are, right? You can also ask them to beef up the low end torque, and if they refuse, you can just go to another tuner that will do what you ask.

He made that tune to save rods, tune is mild, maybe 280-290hp, all other tuners can go up to 305hp on stock hpfp, that's their words, thats why i looking for that stock 276hp map to compare, i don't want 300hp on stock hpfp, just a little bit more, safe power

 

[roli1206]

Don't want to swap, just compare

He made that tune to save rods, tune is mild, maybe 280-290hp, all other tuners can go up to 305hp on stock hpfp, that's their words, thats why i looking for that stock 276hp map to compare, i don't want 300hp on stock hpfp, just a little bit more, safe power

if you want anything "save" get a pump

 

[MPS]

Who is your tuner and what the hell are you thinking running a tune without a hpfp upgrade

He made me a tune that is safe, but i remove it, don't want to drive it until hpfp internals drops in car, tune is fine, no fuel pressure drops on wot, just wandering why i have little bit lower torque than a stock map

if you want anything "save" get a pump

Of course, but in my country is impossible to buy it, i must order it from ebay, and then wait.. Long time

 

[roli1206]

He made me a tune that is safe, but i remove it, don't want to drive it until hpfp internals drops in car, tune is fine, no fuel pressure drops on wot, just wandering why i have little bit lower torque than a stock map

Of course, but in my country is impossible to buy it, i must order it from ebay, and then wait.. Long time

where are you living ?

 

[jsmith]

His profile says Serbia.

 

[roli1206]

His profile says Serbia.

serbia isn't any problem to get a pump my mate is every month in serbia

 

[MPS]

serbia isn't any problem to get a pump my mate is every month in serbia

Do you have some frends that can get me pump in Serbia? Some shops here are lazy, can't lose my nerve with them

 

[roli1206]

Do you have some frends that can get me pump in Serbia? Some shops here are lazy, can't lose my nerve with them

just order some in germany ?

 

[MPS]

just order some in germany ?

I was thinking same thing, my sister is working in Germany now, autotech should be fine?