So its been a minute since ive updated this
Fuel pump is in and wired - the filter element on the bottom is a different configuration than stock, so i had to cut the supply hardline on the hanger and spin the pump. Broke a bunch of those hanger mount screws - had to drill in new bolts.
I cut a 1" grommet into the aluminum access plate to feed the new power supply to the pump. Ran the wire down the center console and behind the trunk plastics.
I was toying with the JP3 battery kit but I really do not like the thought of running the cables under the car, and I do not want to run them through the interior - just going to keep the battery and sell the rest of the kit.....
Picked up this battery mount and going to install it in the stock airbox location -
https://antigravitybatteries.com/pro...20-mount-mele/
Have a local shop that can make the cables so instead of them being 14' long, they will be less than 4. Going to install them across the front face of the front crossmember behind the radiator
Coolant is filled as far as it can be without turning the motor over - I ordered a pettit racing waterpump pulley kit (including the alternator pulley) since i had to lose the FFE idler pulley
Fresh plugs are in, plug wires are run. Oil topped off, set myself up with RGHTBrainDesign for the tune. Hopefully first start this weekend
Still need to either remove or lower the chassis brace across the tunnel at the midpipe, the vibrant pipe hangs low and touches it. Once the car is running ill have to dress up the harness inside the cabin, nearly there......