No horn? No Stop lights? No Cruise Control? Before you replace your Clockspring or Brake switch

mspeedzilla

mspeedzilla

Greenie N00B Member
The fuse in the PJB (PCM) (thing under passenger side dashboard) is fuse #38 for stop and horn. Not to be confused with fuses #68 and #81 for the left and right tail lights. After checking fuse #38 check the fuse in the engine bay on the main block fuse. From there check your horn relay. If all else fails move on to replacing your clock spring and brake switch.


Brake switch here Part BN7N66490

Clock spring here Part BP4K66CS0
 
I'm glad to contribute, original plan was to do the full write up of removing the entire interior of the vehicle dash board included but wound up losing the camera to misfortune and all or most of the videos and pictures along with it
 
Was wondering why the cruise, horn and brake lights on my newest ms6 didnt work. Horn relay was in the armrest cubby lmao. Fixed the cruise and horn. But my brake lights dont work. Gonna have to do some investigating as the ms6 interior glove box is different. STOP fuse in the engine bay is good.
 
You must log in or register to reply here.
Back
Top