[SOLVED] P0335 after new turbo and ex manifold

[JohnnyTightlips]

I recently installed the Pulsar GTX3071r and the Corksport Exhaust Manifold. I kept getting P0335 code when I would start my car. I mentioned this to some buddies and @Maisonvi mentioned he used to get this code with the 4" intake before he zeroed it out at .9v and below. I am guessing I never had an issue before due to the PTE turbo and me idling at a different voltage.

This is how it should look on A and B.


Once I flashed this change it fixed it and I no longer get that code at startup.

 

[Kenlley]

Hi how can i do this I have the same problem I did the same exact thing you did I swapped the turbo to GTX3582R and top mount manifold then this code popped up. Can anyone help me with this?

 

[Awafrican]

Hi how can i do this I have the same problem I did the same exact thing you did I swapped the turbo to GTX3582R and top mount manifold then this code popped up. Can anyone help me with this?

Have you checked for leakes and talked to your tuner because the solution on this thread is a MAF cal. If you have done these then I suggest you do so and create your own thread

 

[Terrance]

Hi how can i do this I have the same problem I did the same exact thing you did I swapped the turbo to GTX3582R and top mount manifold then this code popped up. Can anyone help me with this?

Hey man did you ever figure this problem out? I think I'm dealing with the same thing.

 

[JohnnyTightlips]

Yes, you need to update the mafcal in the tune like I show in the first post. Everything .9v and lower needs a value of 0.