JohnnyTightlips
Motorhead
Precision Turbo Wastegate 46mm Black PW46 PT#PBO085-2000
Purchase Date: Jul 16, 2019
I offered $335 and they took it, not sure if that is still an option.
The Good:
Purchase Date: Jul 16, 2019
I offered $335 and they took it, not sure if that is still an option.
The Good:
- It just works, not fuss and no leaking
- It was priced right and I wanted to not worry about it
- Springs Included so you can pick your starting PSI
- Very nIce fit and finish
- Fits all standard 44mm vband flanges
- Still kinda spendy but you get what you pay for
- Not much else
- If you want a WG that works well and you never have to mess with, just buy it.
- https://www.precisionturbo.net/tech/instruction-manuals/PTE-PW46-Wastegate-Instructions.pdf
- I asked Precision because I did not know how the springs worked. They will start to crack at the registered PSI for the springs, not fully open. I am running an 10.5lb spring as I need that control until I go PI.
- I recommend upgrading to this clamp between the WG and EX Mani as it is easier to work with and seals better. http://www.atpturbo.com/mm5/merchan...tp&Product_Code=CLC-CLA-035&Category_Code=CLA
