Proven Parts List - Common Parts that don't suck

[VTMongoose]

I bought the Delrin shift knob in the OP. Fits like shit, won't thread on properly. Contacted seller, said, "seems like your thread pitch is off", they sent me another one. Same shit. Get about 4-5 revolutions on and it feels like it's cross-threading and gets super stiff. If you take it off, threads look fucked up. Wouldn't recommend until further notice.

 

[Maisonvi]

I bought the Delrin shift knob in the OP. Fits like shit, won't thread on properly. Contacted seller, said, "seems like your thread pitch is off", they sent me another one. Same shit. Get about 4-5 revolutions on and it feels like it's cross-threading and gets super stiff. If you take it off, threads look fucked up. Wouldn't recommend until further notice.

I know a guy who can help with those....

 

[JohnnyTightlips]

I bought the Delrin shift knob in the OP. Fits like shit, won't thread on properly. Contacted seller, said, "seems like your thread pitch is off", they sent me another one. Same shit. Get about 4-5 revolutions on and it feels like it's cross-threading and gets super stiff. If you take it off, threads look fucked up. Wouldn't recommend until further notice.

That sucks, I will add a note.

 

[KiwiFlavor]

@JohnnyTightlips

Wheel studs on the cheep

https://www.summitracing.com/parts/...MI3NuX4sO-1wIVhzaBCh1XGAo0EAAYASAAEgIIm_D_BwE

 

[SharksInSpace]

Tim knows a lot about where to find studs for cheap.

 

[John]

Good deals on MT-90 and MTL for 3 quarts on eBay, for example https://www.ebay.com/itm/Red-Line-O...MTL-GL-4-70W80-SAE-75W80-3-QUART/182738268188

 

[GCPhotographers]

Oil and Filters
--------------------------------------------------------------
Conversion Kit and Quick Drain

• Fumoto Extension - Needed
• Fumoto Drain Valve
• Fumoto Safety Clip

Out of everything, this was one of the best purchase made

[doublepost=1511023102][/doublepost]

Primary O2 Sensor: NTK 24357
Secondary O2 Sensor: NTK 24442

http://www.rockauto.com/en/catalog/...59,exhaust+&+emission,oxygen+(o2)+sensor,5132

Purge valve: DORMAN 911702
http://www.rockauto.com/?wiki=/2008 MAZDA 3 2.3L L4 Turbocharged _Vapor Canister Purge Valve_1442059_4936

Rear Suspension shock mount: DORMAN 924412
http://www.rockauto.com/?wiki=/2008 MAZDA 3 2.3L L4 Turbocharged _Shock Mount_1442059_7572

I heard they are crap. Is it really good or you just googled it?

 

[JohnnyTightlips]

[doublepost=1511023102][/doublepost]

I heard they are crap. Is it really good or you just googled it?

I have been running one for over a year now no issues, they drain slow but are nice and make oil changes very clean. @alexwlwsn and @Maisonvi both have them and have had no issues. The point of this thread is stuff that actually works and is not just crap I googled. Constructive criticism is welcome. If you see anything that does not look correct let me know.

 

[Maisonvi]

The oil valve? It's awesome and I love it. Been running it for 2 years now? Makes oil changes easy and clean. And if you do oil testing you can pull a little out without draining all the pan.

Sent from my SM-G950U using Tapatalk

 

[GCPhotographers]

The oil valve? It's awesome and I love it. Been running it for 2 years now? Makes oil changes easy and clean. And if you do oil testing you can pull a little out without draining all the pan.

Sent from my SM-G950U using Tapatalk

Yup. I putting it on another mazda in a few weeks.

 

[jsmith]

Drain valve that should work with Kozmic OCC. http://www.fumotousa.com/parts.php?partnumber=37

 

[GCPhotographers]

It works for any mazdaspeed or mazda 3 or 6...just get the adapter with it and you're golden.

 

[JohnnyTightlips]

Please remove this until further notice. I am having issues that Stratified believes may be caused by this. I have new OEM in hand and will test this weekend. If problems go away, this product can be labeled a shithole

Will add disclaimer.

 

[KiwiFlavor]

@Flyhigh

What is the verdict on that Amazon MAF sensor? I need one soon.

 

[Flyhigh]

Go ahead and pick one up. Mine wasn't the source of my problem and is currently back in my car. The cost savings over OEM is redonkulous

Sent from my Pixel XL using Tapatalk

 

[therealleifmadse]

So quick question about VC breather for gen1. Does this effectively remove the need to replace the gen1 VC with the gen2 VC?

 

[JohnnyTightlips]

There is a new breather for the gen juan that has a tube which prevents the oil from splashing the filter. I will have to find it and update this at some point. If you find it let me know.

 

[Sho]

There is a new breather for the gen juan that has a tube which prevents the oil from splashing the filter. I will have to find it and update this at some point. If you find it let me know.

Sp63 sells it. I have one

 

[JohnnyTightlips]

Sp63 sells it. I have one

View attachment 8383 View attachment 8384 View attachment 8385

Thanks for the info. I wonder if there is a way to modify mine with a tube like that.

 

[therealleifmadse]

There is a new breather for the gen juan that has a tube which prevents the oil from splashing the filter. I will have to find it and update this at some point. If you find it let me know.

http://www.speedperf6rmanc3.com/products/sp63-valve-cover-breather-for-mazda-gen-1.html

Currently marked unavailable. I'll have to email to see if they are making more.