Here is a list of parts that work for the gen juan. If you know more please put it on the list and I will add it to the list. These are common parts that the daily driver would use. This thread will grow and take time. I will not be going into deep review of each part.
A/C
--------------------------------------------------------------
Belt Drive
--------------------------------------------------------------
Serpentine Belt
Belt Tensioner
--------------------------------------------------------------
Brakes
--------------------------------------------------------------
Brake Pads - Fronts
Brake Rotors - Rear
Brake Fluid
--------------------------------------------------------------
Cooling System
--------------------------------------------------------------
Thermostat
Coolant
Drivetrain
--------------------------------------------------------------
Front Axle
Electrical
--------------------------------------------------------------
Spark Plugs
MAF Sensor
Engine
--------------------------------------------------------------
Timing Cover
--------------------------------------------------------------
Exhaust
--------------------------------------------------------------
O2 Sensors
Purge Valve
Downpipe
Fuel
--------------------------------------------------------------
Injector Studs
You only need 4 studs and 4 nuts but you can pick the material you prefer.
Lighting
--------------------------------------------------------------
Lighting
--------------------------------------------------------------
Oil and Filters
--------------------------------------------------------------
Conversion Kit and Quick Drain
--------------------------------------------------------------
PCV
--------------------------------------------------------------
Breather Valve
PCV Plate
--------------------------------------------------------------
Shift Knobs
--------------------------------------------------------------
Suspension
--------------------------------------------------------------
Endlinks
Bump Stop
Camber Arms
Front Sway Bar Bushings
--------------------------------------------------------------
Transmission
--------------------------------------------------------------
Fluids - 2.6-3 Quarts
Wheels
--------------------------------------------------------------
Wheel Studs
A/C
--------------------------------------------------------------
- 2 Cans R-134a DuPont Suva A/C - 18 ounces required
- Johnsen's 6816UV-6 ISO 100 Premium PAG Lubricant with UV Dye - 5 ounces required
- AC Compressor For Mazda 6, Mazda 3 Speed w/turbo 2.3L (1yr Warr) New 97470
- I used this compressor from Jensen Auto in Michigan, works great. Ask model before you buy as the speed changed half way through on some years.
- Helpful Video - I did this myself and was not too bad.
- ATP RA-129 Carbon Activated Premium Cabin Air Filter
- ATP CF-119 White Cabin Air Filter
- TYC 800023P2 Mazda Replacement Cabin Air Filter
- FRAM CF10218 Fresh Breeze Cabin Air Filter with Arm & Hammer
Belt Drive
--------------------------------------------------------------
Serpentine Belt
- Gates K060911A Serpentine Belt
- OEM - Bando 6PK2310 OEM Quality Serpentine Belt
- Dayco 5060910 Serpentine Belt **
Belt Tensioner
- Gates 38408 Tensioner
- Duralast Idler Pulley 305372 ** - This has a nut on the housing making it much easier to use.
--------------------------------------------------------------
Brakes
--------------------------------------------------------------
Brake Pads - Fronts
- Hawk Performance HB549F.702 HPS High Performance Street Brake Pads
- EBC Brakes DP41574R Yellowstuff Street and Track Brake Pad
- OEM - ATE EU915C Original Disc Brake Pad Set
- EBC Brakes DP31574C Redstuff Ceramic Low Dust
- Hawk Performance HB478F.605 HPS Performance Ceramic Brake Pad
- EBC Brakes DP41749R Yellowstuff Street and Track Brake Pad
- OEM - ATE EU973A Original Disc Brake Pad Set
- EBC Brakes DP31749C Redstuff Ceramic Low Dust
Brake Rotors - Rear
Brake Fluid
- ATE 706202 Original TYP 200 DOT 4 Brake Fluid
- JEGS Performance Products 28073
- Castrol SRF Racing Brake Fluid
- Any Full Synthetic DOT 4 should work well
- Motive Products 0100 European Power Brake Bleeder w/ Adapter
- Bottles - Motive Products 1820 Brake Fluid Catch Bottle Kit
- Front - http://a.co/8FESMY3 - StopTech (950.61010) Brake Line Kit, Stainless Steel
- Rear - http://a.co/4n1DF05 - StopTech (950.61504) Brake Line Kit, Stainless Steel
--------------------------------------------------------------
Cooling System
--------------------------------------------------------------
Thermostat
Coolant
- OEM - Zerex Asian Vehicle Anitfreeze / Coolant
- Prestone Extended Life Antifreeze
- Valvoline Asian Vehicle Antifreeze
- Most all Green Anti-Freeze should work
Drivetrain
--------------------------------------------------------------
Front Axle
- http://www.ebay.com/itm/2-New-DTA-C...Manual-Only-/290929574515?hash=item43bcc10273 - 2 New DTA CV Axles L&R Mazda 3 MazdaSpeed Model 2.3L Turbo Manual Only
- Snap Rings - Mazda Drive Axles Front Snap Ring CX-5 CX-7 CX-9 3 6 OEM H010-25-421A
- OEM - LuK 10-064 Clutch Kit ** Recommended for under 400ft/lbs tq
- LUK design has changed 01/01/19, has to be modified to work with fidanza, will update if this changes
- ACT HD Clutch Kit 6 Puck Sprung w/ Streetlite Flywheel *** Recommended
- ACT HD Clutch Kit 6 Puck Sprung w/ Prolite Flywheel
- South Bend Clutch Stage 3 Endurance Clutch Kit w/ Flywheel
- South Bend Clutch Stage 2 Endurance Clutch Kit w/ Flywheel
- Fidanza 161071 Aluminum Flywheel "generally used with LuK Clutch"
- ACT XACT Streetlight Flywheel Mazdaspeed 3
Electrical
--------------------------------------------------------------
Spark Plugs
- Stock - ILTR-6A8G (3787)
- Step Colder - LTR7IX-11 (6510)
- Step Colder and Fancy "NGK 95605 LTR7BHX Ruthenium HX Plug"
MAF Sensor
- Mazda OEM Mass Air Flow Sensor (MAF) Mazdaspeed 3 2007-2013 | Mazdaspeed 6 2006-2007
L3K9-13-215-9U **Try and find a used one as that will save you a lot of money or shop around but OEM has been proven to work the best and all the cheap ones have not shown any reliability. - If you want a cheaper option and are willing to test Try the Denso 1976040 "they are supposed to be the OE supplier" https://www.rockauto.com/
Engine
--------------------------------------------------------------
Timing Cover
--------------------------------------------------------------
Exhaust
--------------------------------------------------------------
O2 Sensors
Purge Valve
Downpipe
- Catless - M2 Performance Mazdaspeed 3 2007+ Cat-Delete 3" Stainless Steel Downpipe
- Catted - CNT RACING 07-09 Mazdaspeed 3 High Flow Catted downpipe (76mm piping)
- Exhaust Hangers - Torque Solution Exhaust Mount Hanger Kit: Mazdaspeed 3 2007-2009
Fuel
--------------------------------------------------------------
Injector Studs
You only need 4 studs and 4 nuts but you can pick the material you prefer.
- 4 @ M8-1.25 x 50mm ISO 4029 Hex Drive Cup Point Black Oxide Finish Alloy Steel Socket Set Screw - Fastenal Part No. (SKU) - 39862
- OR
- 4 @ M8-1.25 x 50mm ISO 4029 Hex Drive Cup Point Zinc Finish Alloy Steel Socket Set Screw
- OR
- 4 @ M8-1.25 x 50mm ISO 4029 Hex Drive Cup Point Grade A2-21H Stainless Steel Socket Set Screw
- AND
- 4 @ M8-1.25 DIN 6923 Steel Class 8 Zinc Flange Nut - Fastenal Part No. (SKU) - 90701
- OR
- 4 @ M8 x 1.25 DIN 6923 A2-70 Stainless Steel Plain Finish Flange Nut
- AND
- You will also need 4 flat washers
- If you are using OEM concave washers you may need to drill them out a bit to fit on the studs
- AEM E85 High Flow In-Tank Fuel Pump - 340LPH "DROP IN PUMP WILL REPLACE OEM"
- Walbro HELLCAT 525LPH F90000285 Fuel Pump - (Universal E85 Ethanol) Ultra High-Performance - TI Automotive "NOT DROP IN, SEE @Maisonvi FOR DETAILS"
- GB REMANUFACTURING 8059 - Great OEM replacement, can use these seals or use this kit with CS/Overspeed seals
- Note, I have used the GB with CS seals and they have been reliable for over 2 years a 600whp. If you are OEM or ko4 you could likely just use the entire GB kit and skit the CS seals.
- Mazdaspeed 3 and Mazdaspeed 6 BeCuse Injector Seals
- Have re-used these 4 times without issue, tq to proper specs
Lighting
--------------------------------------------------------------
Lighting
--------------------------------------------------------------
Oil and Filters
--------------------------------------------------------------
Conversion Kit and Quick Drain
- Mazda OEM Spin-On Conversion Kit Mazdaspeed 3 2007-2009 | Mazdaspeed 6 2006-2007
- Fumoto Extension - Needed
- Fumoto Drain Valve
- Fumoto Safety Clip
- Cartridge
- Screw On Filters
- Any Oil that is Dexos Gen 2 rated will work great, yes even walmart supertech but below have been tested without issues.
- If you are built motor, run 5w40
- Royal Purple 5w30
- Pennzoil Platinum Full Synthetic 5W30 Motor Oil
- Mobil 1 (120766) Extended Performance 5W-30 Motor Oil
--------------------------------------------------------------
PCV
--------------------------------------------------------------
Breather Valve
PCV Plate
--------------------------------------------------------------
Shift Knobs
--------------------------------------------------------------
- Maisonvi Shift Knobs
- 50mm Delrin shift knob - 10x1.25
- DELRIN TEAR DROP SHIFT KNOB 10X1.25
- ****NOTE**** @VTMongoose had issues with the threading on the delrin knobs, I will update if the seller gets it corrected.
Suspension
--------------------------------------------------------------
Endlinks
- Front - Moog K750073 Stabilizer Bar Link Kit
- Rear - Moog K750069 Stabilizer Bar Link Kit
- Rear - B37F28170B - FEBEST # 0523-MZ3R "running these 1+ year no issues"
- Front - Lowered Cars - FLENNOR FL505H
- OEM 300mm
E46 M3 270mm
Making the difference 30mm or ~1 3/16"
- OEM 300mm
- Front Left- MOOG Control Arm and Ball Joint Assembly RK620068
- Front Right - MOOG Control Arm and Ball Joint Assembly RK620067
Bump Stop
Camber Arms
Front Sway Bar Bushings
--------------------------------------------------------------
Transmission
--------------------------------------------------------------
Fluids - 2.6-3 Quarts
- Genuine Ford Fluid XT-M5-QS Full Synthetic Manual Transmission Fluid "unicorn magic piss"
- TriboDyn 75W-90 Full Synthetic Gear Oil **New kid on the block, great results** !!!SHAKE WELL BEFORE FILLING THE TRANS!!!!
- Red Line 50305 MT-90 75W90 GL-4 Gear Oil
- Red Line 50205 MTL 70W80 GL-4 Gear Oil
- Mobil 1 75W-90 Synthetic Gear Lube
Wheels
--------------------------------------------------------------
Wheel Studs
- http://a.co/4Bgh6Ge - ARP 1007708 Wheel Studs - This is a 5 pack
- Jegs 555-65130 - Press-In Wheel Studs M12-1.5 Thread x 2-1/2" Long x .509" Knurl
- Timken RET166 Wheel Bearing Retaining Clip
- Timken WB000028 Wheel Bearing
- SKP SK930003 Wheel Hub
Last edited:
