Sho's 2007 ms3 build
- Thread starter Sho
- Start date
- Watchers 56
Sho
Silver Member
None...heres a vid I took for @JohnnyTightlips since he's buying it to rebuild and put on his car.
No in/out or side to side play
Sho
Silver Member
No, no pre-made under route comes with that, but all of them will rub against the passenger axle or intermediate shaft if thats not there. So @The_Weis_Guy made one for me and welded it on
The_Weis_Guy
Greenie N00B Member
It wasnt his choice... He brought us tasty beer... Taco night was later, thats all I had after tasty beers were gone lol......
I MEAN "
JohnnyTightlips
Motorhead
LOL this hurts my soul. The only redeemable quality is that you can drink it and do physical work at the same time due to it being mostly water.It wasnt his choice... He brought us tasty beer... Taco night was later, thats all I had after tasty beers were gone lol......
I MEAN "
Sho
Silver Member
Not that it matters now, but I think the whole smoking issue witb the 5862 was caused by a faulty drain line that was blown "in" and not letting the turbo drain properly under certain conditions. There was barely any oil on the exhaust side of the turbo compared to my blown seal 5858..heres a shitty pic of inside the drain line
Here's the exhaust side of my blown seal 5858
Exhaust side of the 5862
Here's the exhaust side of my blown seal 5858
Exhaust side of the 5862
Sho
Silver Member
Well, it's not perfect.. But it's the best it's ever gonna be under my ownership
Pics don't do the color justice, but it's cool how it changes based on the light.
Now just need some new ET streets so I can get out and start logging and tuning for the new turbo!
Last year with the 5862:
6266 setup (illusion purple + Adapted Performance goodies):
Pics don't do the color justice, but it's cool how it changes based on the light.
Now just need some new ET streets so I can get out and start logging and tuning for the new turbo!
Last year with the 5862:
6266 setup (illusion purple + Adapted Performance goodies):
Sho
Silver Member
They have 8k on em and still have plenty of tread on em. Issue is, i let the passenger front go flat over the Winter and when I pumped it back up, I noticed a crack in the sidewall. So not taking any risks
I'll get a pic later of what tread is left
[doublepost=1556755784][/doublepost]You can kinda see the tires here.
I'd trust driving em in a light rain lol
Valve cover breather hose is connected. It's running to a VTA can by the intake
Lookin' sexy as its owner
Sho
Silver Member
40% wgdc from 3500rpm to Rev limit. Shot from the hip on the ssc map. Not bad, aside from a coupler on the cold side deciding it wanted to emancipate itself from the pipe it was attached to at 5300rpm
Will do a boost leak test on my day off on Wednesday and then give her a lil more juice myself before I turn it over to Mark to finish up the tune and get it perfect for me
Will do a boost leak test on my day off on Wednesday and then give her a lil more juice myself before I turn it over to Mark to finish up the tune and get it perfect for me
Sho
Silver Member
I'm gonna push it til I run out of fuel lol. Then eventually go fuel cell with fpr and return
Similar threads
