Speed 3 Gen 2 tech package light mods

C

Clintb3astwood

Greenie N00B Member
Hello Guys!

I'm new to the forums and a new mazdaspeed 3 enthusiast. I hope this post is in the right section.

I haven't picked up a speed 3 yet but im looking to grab one by end of summer, beginning of fall.

In the mean time ive been working a project, i used to do custom headlights on the side and ive always waned to do a custom job on Speed 3 tech package headlights. So right now i have opened a set of speed 3 technology package lights and have modded the stock projector with sharpen the cut off, as well laser etched a custom design and did a passive demon eye mod, as well as led demon eyes. To my surprise i discovered behind the triangle section of the lights cover the DRL section, there might be space to add a second projector. I shall post pics for your viewing and progress here shortly.
 
Opened the light and discovered some space there for possibly a second projector.
received_2178948442172722 by stephen martindale, on Flickr

received_436615110474349 by stephen martindale, on Flickr


I went on the retrofiitsource.com and got STI-R clear lenses and had this design laser etched

20190513_182039 by stephen martindale, on Flickr

20190513_182018 by stephen martindale, on Flickr

Testing led demon dye mod
20190513_214835 by stephen martindale, on Flickr

20190513_214746 by stephen martindale, on Flickr

20190513_214801 by stephen martindale, on Flickr

20190513_214332 by stephen martindale, on Flickr
 
20190513_194744 by stephen martindale, on Flickr

20190513_194114 by stephen martindale, on Flickr

Screenshot_20190517-092550_Messenger by stephen martindale, on Flickr

So the above photo shows the projector cut off stock and unmodified. as you can see its a bit blurry with not much color, In the back of the projector, the reflector bowl where the hid light reflects, is dull and burned.

After opening the projector and swapping the reflector bowl with a fresh one, and a bit more tuning, i was able to get a better cut off.

Screenshot_20190517-092554_Messenger by stephen martindale, on Flickr

20190517_010507 by stephen martindale, on Flickr

A much better cutoff

20190517_010508 by stephen martindale, on Flickr.
 
On to more pictures! So i opened the projector again and performed what is called the Passive Demon eye mod. basically you spray a specific portion of the inside of a projector with a color paint of your choosing, and in the day time at the right angle, it gives off the reflective property of that color through the lens!! i chose yellow!!

20190605_151551 by stephen martindale, on Flickr

20190605_151555 by stephen martindale, on Flickr

20190605_151520 by stephen martindale, on Flickr

20190605_151523 by stephen martindale, on Flickr

20190605_151514 by stephen martindale, on Flickr

20190605_151557 by stephen martindale, on Flickr

And i did a little bit more tweaking to the projector lens for a sharper cut off, still needs a bit more work.

20190605_233417 by stephen martindale, on Flickr

Bertospeed3;3166018 said:
Try not using photofucket and upload the images thru the forums with the "insert image" button.

They look really good tho. I have plans myself using the majin M but not in the headlights. I wanna see these mounted
Click to expand...
 
Heres my lights on my old car i did, these took me a month to do, between working 6 days a week at my full time job lol but a buddy of mine helped out.

In reference to how the lights look unmodified:

IMAG4811 by stephen martindale, on Flickr

After:
FB_IMG_1428373102935 by stephen martindale, on Flickr


IMAG0262_1 by stephen martindale, on Flickr


IMAG0264 by stephen martindale, on Flickr

IMAG6383 by stephen martindale, on Flickr


received_10207115304184817 by stephen martindale, on Flickr

received_10207115301904760 by stephen martindale, on Flickr

received_bWVzc2FnZV9ibG9iX2F0dGFjaG1lbnQ6MTA3OTY4OTk1NTM5MTE3NQ_1 by stephen martindale, on Flickr

MY phone crashed earlier in the year, or i would have posted more of my work.

This is the first time ive done mazda lights so im making my way around them, opening them was a total pain cause i really didnt know where all the hidden screws were but after i found them all opening was easy, so idk ill see. If these come out great, and my time frees up i might offer a limited round of services.
 
20190707_193537 by stephen martindale, on Flickr

20190707_193541 by stephen martindale, on Flickr

Getting an idea of fitment
20190707_193820 by stephen martindale, on Flickr

cutting begins
20190707_201104 by stephen martindale, on Flickr

20190707_201107 by stephen martindale, on Flickr

HOusing must be trimmed as well,
20190707_233610 by stephen martindale, on Flickr

Swapped modded projector in and test fitted G37-R shroud.
20190708_004755 by stephen martindale, on Flickr

20190708_004813_resized by stephen martindale, on Flickr

20190708_004816_resized by stephen martindale, on Flickr

20190708_005027_resized by stephen martindale, on Flickr

20190708_005032_resized by stephen martindale, on Flickr

20190708_005126_resized by stephen martindale, on Flickr

These are just rough drafts for now of how it should look.

At some point ill start on the driver side light and send updates, next step is to paint inside the H1 projectors yellow, mod the driver side projector, then aim and mount the H1 projectors to make sure they are aligned with the oem projector beam..

End goal is to run all four projectors as low beams, stay tuned!
 
i made some big progress last night. I added the Mini H1 projectors into the DRL section of my tech package headlights and mounted them.

Next step will be cutting the shrouds to fit over the projectors.

20190811_211056 by stephen martindale, on Flickr

20190910_210115 by stephen martindale, on Flickr

20190910_210911 by stephen martindale, on Flickr

20190910_210916 by stephen martindale, on Flickr

20190910_210923 by stephen martindale, on Flickr

20190910_210929 by stephen martindale, on Flickr

20190910_211418 by stephen martindale, on Flickr

20190910_211519 by stephen martindale, on Flickr

20190910_223210 by stephen martindale, on Flickr
Output shots, once i get more work done and complete the setup ill get better pics.
20190910_223232_resized by stephen martindale, on Flickr

20190910_223913_resized by stephen martindale, on Flickr

The yellow glow is the passive demon eye mod i did, doing its thing =D
20190910_223927_resized by stephen martindale, on Flickr

20190910_223930_resized by stephen martindale, on Flickr

20190910_231236_resized by stephen martindale, on Flickr

20190910_231246_resized by stephen martindale, on Flickr
 
Picture heavy Updates inbound

20190930_114846 by stephen martindale, on Flickr

20190930_114850 by stephen martindale, on Flickr

20190930_114859 by stephen martindale, on Flickr

20190930_114904 by stephen martindale, on Flickr

20190930_115016 by stephen martindale, on Flickr

20190930_115023 by stephen martindale, on Flickr

20190930_130533 by stephen martindale, on Flickr

20190930_130538 by stephen martindale, on Flickr

20190930_130545 by stephen martindale, on Flickr

Switch back amber function

20190930_130628 by stephen martindale, on Flickr

20190930_130632 by stephen martindale, on Flickr

20190930_130635 by stephen martindale, on Flickr

White halos with TRS demon eyes a Glow
20190930_224117 by stephen martindale, on Flickr

20190930_224120 by stephen martindale, on Flickr

20190930_224125 by stephen martindale, on Flickr

20190930_224127 by stephen martindale, on Flickr

20190930_224151 by stephen martindale, on Flickr

20190930_224154 by stephen martindale, on Flickr

20190930_224157 by stephen martindale, on Flickr

20190930_224336 by stephen martindale, on Flickr

20190930_224352 by stephen martindale, on Flickr

20190930_224406 by stephen martindale, on Flickr

20190930_224422 by stephen martindale, on Flickr

Hopefully the next update will be all demon eyes installed, chrome stripped and ready for paint. This is just a rough draft, ignore the imperfections, they will be repaired with quick steel, sanded smoothed, and prepped for paint as well.
 
Not usually one for headlight mods, but that's cool. Never seen the passive demon eye thing before.
 
SharksInSpace said:
Not usually one for headlight mods, but that's cool. Never seen the passive demon eye thing before.
Click to expand...
Yeah ive always wanted to do the passive demon eye mod on my old build but never did. I figured since i had the lights open, what the hell right? I;ve got more pics for your viewing pleasure as well as videos on my Flickr of the lights in action.
 
Excited to say im 90% complete, just assembling lights and running wires after prep work and painting. ill let the work speak for itself, picture and video heavy!!

I did clear clear primer followed by 1K Black metallic flake paint, followed by colorshfit clear coat and a final 2K clear Coat.
20191110_171000_resized by stephen martindale, on Flickr

20191110_171008_resized by stephen martindale, on Flickr

20191110_171042_resized by stephen martindale, on Flickr

20191110_195550_resized by stephen martindale, on Flickr

20191110_195554 by stephen martindale, on Flickr

20191110_195600 by stephen martindale, on Flickr

20191110_195603 by stephen martindale, on Flickr

Dupicolor metalcast yellow for the turn signal housings with a splash of color shift clear
20191110_195606 by stephen martindale, on Flickr

20191110_195622 by stephen martindale, on Flickr

20191110_210209 by stephen martindale, on Flickr

20191110_210217 by stephen martindale, on Flickr

Dont mind the cutting and ugliness, it had to be done to fit the halo that will sit behind this the projector shroud. JB quik and paint camo'd it a bit.
20191110_210225 by stephen martindale, on Flickr

20191110_210228 by stephen martindale, on Flickr

20191112_011902 by stephen martindale, on Flickr

20191112_012717 by stephen martindale, on Flickr

20191112_012726 by stephen martindale, on Flickr

20191112_012733 by stephen martindale, on Flickr

20191112_012740 by stephen martindale, on Flickr

20191112_012746 by stephen martindale, on Flickr

Demon eye test
20191112_015110 by stephen martindale, on Flickr

20191112_015125 by stephen martindale, on Flickr

20191112_020117 by stephen martindale, on Flickr

20191112_020124 by stephen martindale, on Flickr

20191112_020325 by stephen martindale, on Flickr

20191112_020338 by stephen martindale, on Flickr

20191112_020745 by stephen martindale, on Flickr

20191112_020750 by stephen martindale, on Flickr

Color chasing Led strip test with Turn signal Orange.
20191112_020921 by stephen martindale, on Flickr

20191112_020923 by stephen martindale, on Flickr

20191112_020924 by stephen martindale, on Flickr

20191112_020926 by stephen martindale, on Flickr

20191112_020953 by stephen martindale, on Flickr

20191112_020957 by stephen martindale, on Flickr

Pictures dont do em Justice, so here are some videos.
=D Just click on the videos, my Flickr is public so you should see them play.
20191112_022245_31314206837999 by stephen martindale, on Flickr

20191112_022322_31350959835277 by stephen martindale, on Flickr

20191112_022420_31408993863015 by stephen martindale, on Flickr

20191112_022458_31447359481386 by stephen martindale, on Flickr

20191112_022540_31489037191891 by stephen martindale, on Flickr

20191112_022640_31549594669524 by stephen martindale, on Flickr

Thats all for now folks, please leave any feedback, comments, suggestions etc. This thread seems kinda dead, lets liven it up guys!!!

Once everything is properly assembled and on the car ill do the final video. Hopefully before the month is up.
 
Alright Ladies and gents, i added the color chasing strips and partially put the lenses on to see how they look "closed". ill let the pics speak for themselves!

Wires in the back have been ran, just need to seal things up in the back, close headlights and swap headlight harnesses and hids on to these lights then i can install on the car, 99% done!

20191120_025310_resized by stephen martindale, on Flickr

20191120_025315_resized by stephen martindale, on Flickr

20191120_025319_resized by stephen martindale, on Flickr

20191120_025326_resized by stephen martindale, on Flickr

20191120_025330_resized by stephen martindale, on Flickr

Yellow Passive demon eye mod inside.
20191120_025511_resized by stephen martindale, on Flickr

20191120_025521_resized by stephen martindale, on Flickr

Low Beam Halo Test,
20191120_030212_resized by stephen martindale, on Flickr

20191120_030215_resized by stephen martindale, on Flickr

20191120_030228_resized by stephen martindale, on Flickr

20191120_030234_resized by stephen martindale, on Flickr

Low beam turn signal switchback function test.

20191120_030421_resized by stephen martindale, on Flickr

20191120_030424_resized by stephen martindale, on Flickr

20191120_030433_resized by stephen martindale, on Flickr

20191120_030436_resized by stephen martindale, on Flickr

All Halos tested, the halos in the rear on the second set of projectors in the rear had to be removed, the wouldnt fit with the shroud on, so im just running one up front and the other in the low beam section.

20191120_030638_resized by stephen martindale, on Flickr

20191120_030642_resized by stephen martindale, on Flickr

20191120_030648_resized by stephen martindale, on Flickr

20191120_030652_resized by stephen martindale, on Flickr

20191120_030759_resized by stephen martindale, on Flickr

20191120_030803_resized by stephen martindale, on Flickr

20191120_030811_resized by stephen martindale, on Flickr

20191120_030815_resized by stephen martindale, on Flickr

Halos AND Strips on

20191120_031458_resized by stephen martindale, on Flickr

20191120_031503_resized by stephen martindale, on Flickr

20191120_031509_resized by stephen martindale, on Flickr

20191120_031516_resized by stephen martindale, on Flickr

20191120_031548_resized by stephen martindale, on Flickr

20191120_031602_resized by stephen martindale, on Flickr

VIDEOS BELOW, click to see!
Switch back amber Led strip intro, the strips can be customized to switch back in many different functions and speeds etc, this is just one of a few examples in the video.

20191120_031850 (1) by stephen martindale, on Flickr

Brightness test

20191120_135952_14027502399908 by stephen martindale, on Flickr

Color Chasing test, hundreds of different combos and settings for these strips! ITs being controlled by the Ghozt lighting module and an app on my phone by Ghozt lighting
20191120_140133_14128159163463 by stephen martindale, on Flickr

20191120_140153_14148852558195 by stephen martindale, on Flickr

Hope you all enjoyed this build, last update will be them sealed up and on the car, hopefully before the end of the month! Comments are welcome!
 
Final Update guys, got the lights on months ago, just been too busy to find the time to upload these.

I also did a Corksport front lip which you'll see in one of the pictures, Corksport BBK, SS brake lines, new rotors and pads and a ton of things you cant see. Scale coilovers with swift springs and ISC coilover covers, Moog front lower control arms, Moog inner and outer tie rods, Scale end links, Rear lower moog control arms, SPC upper camber arms, Whiteline front sway bar bushings, Corksport Rear sway bar with bushings, White line bumpsteer kit, with all that suspension work now i have an annoying front end clunk i didnt have before so now i gotta address that. Eric yarborough Oil return line since my stock one was leaking, valve cover gasket leak, Corksport Big bore TB, got an HTP 3.5 intake i havent installed yet etc etc

So yeah lots been done to the car, but the lights are on the car done, so enjoy the pics.

I dont have many demon eye pics, because the bluetooth controller keeps draining the battery so i disconnected it, will be wiring a separate switch in the spring to cut the power from the battery when the car is off.

Anywho enjoy the Photos and videos will be last.

20191127_210828_resized by stephen martindale, on Flickr

20191127_210854_resized by stephen martindale, on Flickr

20191127_214233_resized by stephen martindale, on Flickr

20191127_214239_resized by stephen martindale, on Flickr


20191127_214344_resized by stephen martindale, on Flickr

Demon eyes
20191127_214457_resized_1 by stephen martindale, on Flickr

20191127_214522_resized_1 by stephen martindale, on Flickr

20191127_215415_resized_1 by stephen martindale, on Flickr

20191127_215424_resized by stephen martindale, on Flickr

20191127_215427_resized by stephen martindale, on Flickr

20191127_220129_resized by stephen martindale, on Flickr

20191127_220133_resized by stephen martindale, on Flickr

20191127_222558_resized_1 by stephen martindale, on Flickr

20191127_222604_resized_1 by stephen martindale, on Flickr

20191127_222605_resized_1 by stephen martindale, on Flickr

20191127_222613_resized by stephen martindale, on Flickr

20191127_223009_resized_1 by stephen martindale, on Flickr

20191127_223722_resized by stephen martindale, on Flickr

20191127_223728_resized by stephen martindale, on Flickr

Painted Passive Demon eyes doing their thing
20191127_223746_resized_2 by stephen martindale, on Flickr

20191127_224421_resized_2 by stephen martindale, on Flickr

Out the shop day time pics
20191130_130639_resized_1 by stephen martindale, on Flickr

20191130_130721_resized_2 by stephen martindale, on Flickr

20191130_130730_resized_2 by stephen martindale, on Flickr

20191130_130748_resized_2 by stephen martindale, on Flickr

Sittin Pretty
20191202_203729_resized_1 by stephen martindale, on Flickr

CS Front lip lookin good
20191205_172527_resized by stephen martindale, on Flickr

20191211_165155_resized by stephen martindale, on Flickr

20191211_221510_resized by stephen martindale, on Flickr

Sadly had some condensation, i did open and clean then resealed it.
20191214_104413_resized by stephen martindale, on Flickr

20191214_151717_resized by stephen martindale, on Flickr

Ended up swapping back to an OEM driver side lens, it needs to be redone, again lol
20191220_080420_resized by stephen martindale, on Flickr

20191220_080429_resized by stephen martindale, on Flickr

20191220_080542_resized by stephen martindale, on Flickr

20191220_080550_resized by stephen martindale, on Flickr

Videos

received_559830794794187 by stephen martindale, on Flickr

received_1203053016553414 by stephen martindale, on Flickr

20200110_160236_51000009967573 by stephen martindale, on Flickr

20200110_160441_51125485185285 by stephen martindale, on Flickr

received_430720330946590 by stephen martindale, on Flickr
 
This has been a very fun build, lets see how it holds up. Might make a change or two over the summer, or leave ti as is. ill see.
 
Clintb3astwood said:
Held up just fine, no leaks and it stayed outside all winter.

https://flic.kr/p/2jhHx5k
Click to expand...
That's awesome man, I stated working on a set of halogen lights for my 10 a while back but it's nothing compared to what you've done. I blacked out the functional chrome with the black out chrome kit (so is setup functional) and painted the rest of the nonfunctional chrome gunmetal. Put a white halo on around the low beam, got the Morimoto XBT Bluetooth controller for a pair of RGB demon eyes and RGBW halos, and got a switchback LED strep to mount on the edge of the reflector. It's been sitting on my work bench untouched for 2+ years[emoji28]

What BT controller did you use that was draining the battery?

Did you use any of those one way condensation vent patches?

Here are some pics of how far I got. I wanted the switchback to go along the reflector but I was having trouble finding an adhesive that would stick to the silicone and the plastic, and it was really tight up against the lens.20200703_121714.jpg20200703_121640.jpg20200703_121655.jpg20200703_115201.jpg

Sent from my SM-G973U using Tapatalk
 
scubasteve said:
That's awesome man, I stated working on a set of halogen lights for my 10 a while back but it's nothing compared to what you've done. I blacked out the functional chrome with the black out chrome kit (so is setup functional) and painted the rest of the nonfunctional chrome gunmetal. Put a white halo on around the low beam, got the Morimoto XBT Bluetooth controller for a pair of RGB demon eyes and RGBW halos, and got a switchback LED strep to mount on the edge of the reflector. It's been sitting on my work bench untouched for 2+ years[emoji28]

What BT controller did you use that was draining the battery?

Did you use any of those one way condensation vent patches?

Here are some pics of how far I got. I wanted the switchback to go along the reflector but I was having trouble finding an adhesive that would stick to the silicone and the plastic, and it was really tight up against the lens.View attachment 14874View attachment 14875View attachment 14876View attachment 14877

Sent from my SM-G973U using Tapatalk
Click to expand...
Hey bud thats not a bad setup! Definitely simple and easy to do. I used to do custom headlight work on the side which is why i went all out here.

The nonfunctional chrome section i usually paint it that yellow metalcast chrome color so when using a bulb in the housing it gives off a bright yellow reflective color. Or sometimes ill put a projector in each of those unused housings like i did in mine as well.

I used the Moriomoto XBT demon eyes in all four projectors. The bluetooth controller needs constant power so you can power them even when the car is off. The issue i was having is it was always on and draining the battery. I found a solution, i bought a wireless relay that i connect the blue tooth controller to, then connect the relay to the battery. Which a wireless remote i can power and kill power to the relay, so i basically power off the blue tooth controller with the push of a button, then can use the demon eyes even when the car is off without draining the battery to death. The relay was like $25


You know, ive ordered them, and NEVER ever used them lol i do use Silica packets, so if moisture gets in, the packets absorb them. But if you do an excellent job sealing the light condensation usually doesnt get in.

For getting the strip to stick, they usually come with 3M double sided tape on the back, if not you can buy some and use that. Use a lignter or heat gun and apply it to the back of the strip and press and hold hard til the tape drys from being heated, it sticks amazingly. Also make sure you clean the area you are sticking the strip on properly.

And i feel you on the 2 years, builds sometimes take months to do depending on how busy i am
 
You must log in or register to reply here.
Back
Top