Whitezilla products water pump pulley

[Sleepin6]

Got it today after waiting a month for it and installed it today. Will let you guys know how it performs once im done installing all my pi stuff and a toon.

 

[Raider]

Feel the power gains yet? Should put you in the back of the seat like when the NOS button is pressed.

 

[Sleepin6]

Feel the power gains yet? Should put you in the back of the seat like when the NOS button is pressed.

Cooler temps most likely…nos is too fast n furious for me

 

[Sleepin6]

So update on pulley is that the driving temps definitely drop faster but idle temps are only different by 5-10 degrees. Im happy with it overall and definitely don’t see 219 as much as before.

 

[jsmith]

How does an undersized pulley keep things cooler?

RPM would equate to fluid flow, and flow would equate to cycle time (radiator -> engine -> radiator etc). So less flow means slower cycle times which should show up as higher temps exiting the engine.

What am I missing here?

 

[Awafrican]

How does an undersized pulley keep things cooler?

RPM would equate to fluid flow, and flow would equate to cycle time (radiator -> engine -> radiator etc). So less flow means slower cycle times which should show up as higher temps exiting the engine.

What am I missing here?

Smaller pulley = more rpm when driven by a bigger pulley. So it actually increases flow which as long as the rad can shed the heat and the fluid can pickup the heat from the objects is certainly a good thing as it should keep the coolant cooler allowing for more thermal transfer from the engine to coolant

 

[Mtnbker3531]

Well I just ordered one to go with my KoyoRad! I figure since I'm moving to FMIC it can't hurt.