KiwiFlavor
Greenie N00B Member
BNR S4 - Can not pass 24-25psi? Boost Issue...
- Thread starter pwdunmore
- Start date
djohns
Greenie N00B Member
Sí señor
KiwiFlavor
Greenie N00B Member
I know I have them.
?
crapatalk it sucks for free
crapatalk it sucks for free
djohns
Greenie N00B Member
pwdunmore
Greenie N00B Member
Got some knock from the leaner AFR by solving part of my boost leak issue. Changed all the crappy hose clamps but I think my Forge BPV may be leaking with the blue spring so I am planning to swap in the red spring.
Rob will clean from the AFR's once I get a new map but I still need to fix something...
Rob will clean from the AFR's once I get a new map but I still need to fix something...
pwdunmore
Greenie N00B Member
Fixed the issue by swapping my 3 Bar MAP sensor with a CS 3.5 Bar MAP & a shorter bolt.
The stock bolt may have been bottoming out and not held the sensor in all the way... or the sensor was crap.
Car pulls hard to redline, logs attached for anyone who is curious.
This is after:
1. Rerouting 3-port EBC - improved responsiveness
2. Boost testing intercooler + piping - Found big leaks, swapped many hose clamps
3. taking apart VTCS bar - found missing plastic o-ring and replaced it
4. Installed red spring on BPV (Forge V2)
Thank you to everyone who helped with suggesting things.
The stock bolt may have been bottoming out and not held the sensor in all the way... or the sensor was crap.
Car pulls hard to redline, logs attached for anyone who is curious.
This is after:
1. Rerouting 3-port EBC - improved responsiveness
2. Boost testing intercooler + piping - Found big leaks, swapped many hose clamps
3. taking apart VTCS bar - found missing plastic o-ring and replaced it
4. Installed red spring on BPV (Forge V2)
Thank you to everyone who helped with suggesting things.