Disi-MZResponse

[nindoja]

Bastards, i want remote res. Not enough room for hose to go around it. Im going to steal some of the fabric on the alternator heat sheild and see if i can wrap the loom in that. Someone needs to do a write up of the mods you need to make to a stock fost im. Ive had to pull the mani like 10 times trying to get all the pieces cut and trimmed so it will fit.

For what it's worth, I've been running this manifold for a while on a first gen and my wire loom looks fine (no heat damage) jammed between the IM and the PS reservoir.

 

[Mauro_Penguin]

DISI 2.0

Becuz science...

And engineering too...

I like it!

 

[Enki]

Spreadsheet hell AKA "Base wiring diagram."
Yes, my car will have three fucking ECUs in it, because reasons.

Wire gauge and accessory draw:


Pinout key for Megasquirt 3 Pro:


Pinout description for Megasquirt 3 Pro:



Pinout key for Microsquirt I/O Box:


Pinout description for Microsquirt I/O Box:


Also, I ordered some more fuel shit so I can get that going/plumbed, which is nice.
More to follow as time permits.

 

[Chpspd]

Spreadsheet hell AKA "Base wiring diagram."
Yes, my car will have three fucking ECUs in it, because reasons.

Wire gauge and accessory draw:
View attachment 6216

Pinout key for Megasquirt 3 Pro:
View attachment 6217

Pinout description for Megasquirt 3 Pro:
View attachment 6220


Pinout key for Microsquirt I/O Box:
View attachment 6218

Pinout description for Microsquirt I/O Box:
View attachment 6221

Also, I ordered some more fuel shit so I can get that going/plumbed, which is nice.
More to follow as time permits.

How did you determine wire size?

I'm asking because the amps to wire size seems similar to national electrical code requirements, but I'm not familiar with working on DC systems. #12AWG seems large for equipment on a car.

Here is a chart I found through google, it's for DC systems on boats.

Have you selected an insulation type? Or is there generic "car" wire that's good for harsh engine environments?

 

[Enki]

Mine is silicone coated, and I'm up-sizing my wiring for durability somewhat (except for the primary trunk/feed from alt and starter).

Edit:
From Crutchfield:

 

[Enki]

"Yo Enki, your car has been pretty close to being done for a while now. Why do you still think it won't be running until August?"
One of the reasons is because of shit like this:


Just about every order has been fucked in some way. Much wasted money, but more than that, mucho wasted time.

 

[Easter Bunny]

wiring is the devil for any project car, the scope of what you are changing and a desire to do it correctly is just making it that much worse

 

[AYOUSTIN]

Lol and I thought it was a pain to wire in two ss controllers and make harnesses for them

 

[Enki]

Going dark for a while, when I return it will be with a proper update.

 

[Raider]

Going dark for a while, when I return it will be with a proper update.

See you on the flip side.

Sent from my SM-G930T using Tapatalk

 

[KiwiFlavor]

We'll miss you @Enki !

 

[Easter Bunny]

Dont die

 

[Big SC]

don't rekt

 

[VashEXE]

Going dark for a while, when I return it will be with a proper update.

Once you go black...

 

[udntknw]

Once you go black...

You never walk the same?

 

[Littleloogy]

So, it's been 1.5 months since the dark ages... I miss you @Enki




Sent from my iPhone using Tapatalk Pro

 

[Big SC]

You never walk the same?

side to side

 

[Sho]

Enki.where art thou?

 

[JohnnyTightlips]

Enki is still alive, he asked me to post this. enkiworks.tech he said he will be updating it.

 

[aaronc7]

Looks like the website is up and running about as well as his car