Rules: 4th gear log on a straight, flat, closed course. Start at 2.5-3k rpm and go to 101 mph at least. Do not brake boost. Post the log and your modifications/turbo/fueling! Please use a similar format to everyone else so I can just copy/paste into the OP.
If you have 2 or more cells saying 60 mph and/or 100 mph, use the first cell. If your 60 mph and/or 100 mph are not in a cell, use an average. (I.E. your log goes 59 mph to 61 mph. Add those times together and divide by 2)
If you want to list whp using VD, make sure you're using CF 1.01 and smoothing 3.
60-100 times are a good way to judge quickness/power under the curve. Keep in mind factors such as temperature, humidity, elevation, and general air quality will play a role.
3.55 - andale927 (CS FMIC, E50, Port Injection, SP63 built motor, PTE 5558 Gen2, , 4" RAMFab intake, ST intake manifold, bunch of other crap, 36psi) 550whp/480wtq mustang dyno
Barrett - 3.860sec 60-101 (CST6 + CS manifolds + CS cams)
3.89 - Vash EXE (CPE TMIC, E54, Speed Solutions TMIC 6th Port setup, Speed Solutions built motor, head work, CS cams, EFR 7163, Loudvalves Exhaust Cutout, ButtStallion 3.5" intake, CS intake manifold, lots of other things) 550whp/500wtq
4.02 - Sho (5862 JB, Built bottom end, stock head/valve train/headstuds) E23 + 2000cc/min of 100% meth. Cobb FMIC, cpe exhaust mani) 517 whp/ 474 wtq
4.2 - Maisonvi (GT3076, 4" Intake, 3" catless tbe, FMIC, PI, 93 octane) 443 whp /409 wtq
4.21 - andale927 (CS FMIC, E50, Port Injection, SP63 built motor, PTE 5558 Gen2, , 4" RAMFab intake, ST intake manifold, bunch of other crap) 420whp/380wtq
4.313 - Sho MS6 - Stock engine. 6266, 30psi peak from 6500rpm+ E60 mix. PI w/ hellcat pump
4.401 - Johnny Tightlips (PTE 5862 JB, e50, 34psi. built motor, manifolds, pi, etc)
4.7 sec - Alexwsn Built motor, PI, single runner head, Precision 6062, 235/45r17 tires. Note: did the conversion factor for tire size in the spreadsheet next to the AP vehicle speed.
4.712 - Enki EFR 6758, E29, 8 GPH 50/50 (untuned), ASL: 3000 (DA 4k+) Misc: TMIC, 20.5 peak PSI, 85 deg ambient
5.2 - Sharksinspace ( CST4 3" intake, 3" catless tbe, cobb fmic, e85 pd tune)
5.25 - Sho MS6 (stock motor, 6266, pi, etc)
5.265 - purpfox (BNR S3, 3" I / 3" TBE / FMIC / E30)
5.5 - Johnny Tightlips(CST4 3.5" intake, 3" catless tbe, turbo xs fmic, 93) self tune
5.7 sec - Mangosmoothie (K04, I / TP / TMIC / CBE / E33)
5.816 - Sonofnothing (K04, Cobb intake/tih, Cobb DP, ETS tmic, Freektune e30)
6.742 seconds - Sho (Ms6. 3" intake, cpe tmic, hpfp, test pipe, 93 octane tune)
6.8 - Johnny Tightlips PTE JBB 5862 whopping 17lbs of boost. built motor, all the bolt ons, no pi, 93.
7.367s - Trithemius - MS6, BNRS3 v1, 3 inch intake, Corksport TMIC, Test Pipe, Magnaflow catback, HPFP internals, stock downpipe, 93 Octane. 21psi of boost. Done in cool, not cold weather.
If you have 2 or more cells saying 60 mph and/or 100 mph, use the first cell. If your 60 mph and/or 100 mph are not in a cell, use an average. (I.E. your log goes 59 mph to 61 mph. Add those times together and divide by 2)
If you want to list whp using VD, make sure you're using CF 1.01 and smoothing 3.
60-100 times are a good way to judge quickness/power under the curve. Keep in mind factors such as temperature, humidity, elevation, and general air quality will play a role.
3.55 - andale927 (CS FMIC, E50, Port Injection, SP63 built motor, PTE 5558 Gen2, , 4" RAMFab intake, ST intake manifold, bunch of other crap, 36psi) 550whp/480wtq mustang dyno
Barrett - 3.860sec 60-101 (CST6 + CS manifolds + CS cams)
3.89 - Vash EXE (CPE TMIC, E54, Speed Solutions TMIC 6th Port setup, Speed Solutions built motor, head work, CS cams, EFR 7163, Loudvalves Exhaust Cutout, ButtStallion 3.5" intake, CS intake manifold, lots of other things) 550whp/500wtq
4.02 - Sho (5862 JB, Built bottom end, stock head/valve train/headstuds) E23 + 2000cc/min of 100% meth. Cobb FMIC, cpe exhaust mani) 517 whp/ 474 wtq
4.2 - Maisonvi (GT3076, 4" Intake, 3" catless tbe, FMIC, PI, 93 octane) 443 whp /409 wtq
4.21 - andale927 (CS FMIC, E50, Port Injection, SP63 built motor, PTE 5558 Gen2, , 4" RAMFab intake, ST intake manifold, bunch of other crap) 420whp/380wtq
4.313 - Sho MS6 - Stock engine. 6266, 30psi peak from 6500rpm+ E60 mix. PI w/ hellcat pump
4.401 - Johnny Tightlips (PTE 5862 JB, e50, 34psi. built motor, manifolds, pi, etc)
4.7 sec - Alexwsn Built motor, PI, single runner head, Precision 6062, 235/45r17 tires. Note: did the conversion factor for tire size in the spreadsheet next to the AP vehicle speed.
4.712 - Enki EFR 6758, E29, 8 GPH 50/50 (untuned), ASL: 3000 (DA 4k+) Misc: TMIC, 20.5 peak PSI, 85 deg ambient
5.2 - Sharksinspace ( CST4 3" intake, 3" catless tbe, cobb fmic, e85 pd tune)
5.25 - Sho MS6 (stock motor, 6266, pi, etc)
5.265 - purpfox (BNR S3, 3" I / 3" TBE / FMIC / E30)
5.5 - Johnny Tightlips(CST4 3.5" intake, 3" catless tbe, turbo xs fmic, 93) self tune
5.7 sec - Mangosmoothie (K04, I / TP / TMIC / CBE / E33)
5.816 - Sonofnothing (K04, Cobb intake/tih, Cobb DP, ETS tmic, Freektune e30)
6.742 seconds - Sho (Ms6. 3" intake, cpe tmic, hpfp, test pipe, 93 octane tune)
6.8 - Johnny Tightlips PTE JBB 5862 whopping 17lbs of boost. built motor, all the bolt ons, no pi, 93.
7.367s - Trithemius - MS6, BNRS3 v1, 3 inch intake, Corksport TMIC, Test Pipe, Magnaflow catback, HPFP internals, stock downpipe, 93 Octane. 21psi of boost. Done in cool, not cold weather.
Last edited:
